English
Language : 

MPM-30IS Datasheet, PDF (1/2 Pages) MicroPower Direct, LLC – Board Mount, 30W Single, Dual & Triple Out AC/DC Power Supplies
MPM-30IS Series
Board Mount, 30W
Single, Dual & Triple Out
AC/DC Power Supplies
Key Features:
Electrical Specifications
• 30W Output Power
Specifications typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
• Universal 85-265 VAC Input Parameter
Conditions
Min. Typ. Max. Units
• EN 60950 Approved
Input Voltage Range
85
265
VAC
• Meets IEC Safety Class II Input Frequency
47
440
Hz
• Industry Standard Pin-Out Input Current
See Model Selection Guide
• Single, Dual & Triple Outputs
• Meets EN55022 B
• >250 kHour MTBF
Chassis Mount Models
Inrush Current
EMI
Safety Ground Leakage Current
115 VAC
20.0
230 VAC
40.0
Meets CISPR Pub. 22/FCC Class B
115 VAC
0.1
230 VAC
0.3
A Pk
mA
& DIN Rail Mount
Output
Option Available!
Parameter
Conditions
Min. Typ. Max. Units
Output Voltage
See Model Selection Guide
Output Current
See Model Selection Guide
Output Voltage Accuracy, Note 1
±1.0 ±2.0
%
Line Regulation
VIN = Min to Max
±0.2 ±1.0
%
Load Regulation, Single Output
IO = Min to Max
±0.5 ±1.0
%
Load Regulation, Dual Output
IO = Min to Max
±2.5 ±5.0
%
Load Regulation, Triple Output - Primary
IO = Min to Max
±2.5 ±5.0
%
Load Regulation, Triple Output - Aux.
IO = Min to Max
±4.0
%
Ripple & Noise (20 MHz)
3.3 & 5.0 VDC Output
All Other Outputs
1.5
1.0
1.8
1.3
%VP-P of VO
Hold-Up Time
115 VAC, 60 Hz
20
mSec
Temperature Coefficient
±0.02
%/°C
Over Voltage Protection
Zener Diode Clamp
120
% of VO
Short Circuit Protection, Note 4
Continuous (Autorecovery)
Overload Protection, Note 5
Typ. 120% to 180% of Output Power
General
Parameter
Conditions
Min. Typ. Max. Units
Isolation Voltage
Input to Output 3,000
VAC
Isolation Test Voltage
Input to Output, Flash Tested For 60S 4,700
VAC
Isolation Resistance
500 VDC 100
MΩ
EMI/RFI
Conducted
EN 55022 Level B
Electrostatic Discharge (ESD)
IEC/EN 61000-4-2 Level B
MicroPower Direct
292 Page Street
EMC Compliance
RF Field Susceptibility
Electrical Fast Transients/Bursts On Mains
IEC/EN61000-4-3
IEC/EN 61000-4-4 Level 3 2 kV
Suite D
Surge IEC/EN 61000-4-5 Level 3 1kV/2 kV
Stoughton, MA 02072
Switching Frequency
100
kHz
USA
Environmental
T: (781) 344-8226
F: (781) 344-8481
E: sales@micropowerdirect.com
W: www.micropowerdirect.com
Parameter
Operating Temperature Range
Storage Temperature Range
Cooling
Humidity
Conditions
Min. Typ. Max.
Ambient -25 +25 +71
-40
+85
Free Air Convection (See Derating Curve)
RH, Non-condensing
95
Units
°C
°C
%
Physical
Case Size
3.50 x 2.50 x 0.85 Inches (88.9 x 63.5 x 21.5 mm)
Case Material
Non-Conductive Plastic& Fiberglass (UL94-V0)
Weight
6.23 Oz (177g)
Reliability Specifications
Parameter
Conditions
Min. Typ. Max. Units
MTBF
MIL HDBK 217F, 25°C, Gnd Benign 250
kHours
Safety Standards
IEN 60950, IEC 60950
Safety Approvals
IEN 60950, IEC 60950
Safety Class
IEC 61140 Class II