MPM-10 Datasheet, PDF (1/2 Pages) MicroPower Direct, LLC – Compact, 10W PC Mount Single, Dual & Triple Out AC/DC Power Supplies

MPM-10 Series
Compact, 10W PC Mount
Single, Dual & Dual ISO Out
AC/DC Power Supplies
Electrical Specifications
Key Features:
Specifications typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
• 10W Output Power
Parameter
Conditions
Min. Typ. Max. Units
• Universal 85-264 VAC Input _{Input Voltage Range}
• EN 60950 Approved (UL)
Input Frequency
85
264
VAC
120
370
VDC
47
63
Hz
• Single, Dual & Dual Iso Outputs Input Current
See Model Selection Guide
• Meets EN 55022 B
• >200 kHour MTBF
Inrush Current
EMI
115 VAC
10.0
230 VAC
20.0
Meets CISPR Pub. 22/FCC Class B
A Pk
• Compact PC Mount Case
Safety Ground Leakage Current
115 VAC
230 VAC
0.1
mA
0.3
Output
Parameter
Conditions
Min. Typ. Max. Units
Output Voltage
See Model Selection Guide
Output Current
See Model Selection Guide
Output Voltage Accuracy
±2.0
%
Line Regulation
±0.5
Load Regulation, See Note 1
See Model Selection Guide
Ripple & Noise (20 MHz)
50
mV Pk - Pk
Hold-Up Time
115 VAC
20
230 VAC
80
mSec
Temperature Coefficient
±0.02
%/°C
Short Circuit Protection
Continuous (Autorecovery)
Overload Protection
Typ. 110% of Output Power
General
Parameter
Conditions
Min. Typ. Max. Units
Input to Output 3,000
Isolation Voltage
Input to Ground 1,500
VAC
Output to Ground 500
EMI/RFI
Conducted
EN 55022 Level B
Electrostatic Discharge (ESD)
EN 61000-4-2 Level 3 6kV/8kV
EMC Compliance
RF Field Susceptibility
Electrical Fast Transients/Bursts On Mains
EN61000-4-3
EN 61000-4-4 Level 3 2 kV
Surge
EN 61000-4-5 Level 3 1kV/2 kV
Switching Frequency
150
kHz
Environmental
Parameter
Conditions
Min. Typ. Max. Units
MicroPower Direct
292 Page Street
Operating Temperature Range
Ambient -25 +25 +70
°C
Case
+90
°C
Suite D
Storage Temperature Range
-25
+105
°C
Stoughton, MA 02072
USA
Cooling
Humidity
Free Air Convection (See Derating Curve)
RH, Non-condensing
85
%
T: [phone]
F: [phone]
E: [e-mail]
W: www.micropowerdirect.com
Physical
Case Size
Case Material
Weight
Reliability Specifications
2.16 x 1.77 x 0.81 Inches (55.0 x 45.0 x 20.5 mm)
Non-Conductive Black Plastic (UL94-V0)
4.23 Oz (120g)
Parameter
Conditions
Min. Typ. Max. Units
MTBF
MIL HDBK 217F, 25°C, Gnd Benign 200
kHours
Safety Standards
UL 60950, EN 60950
Safety Approvals
UL, cUL; File No. E245422
www.micropowerdirect.com