MPM-07S Datasheet, PDF (1/2 Pages) MicroPower Direct, LLC – Compact 1 x 2 Inch 7W, Single Output AC/DC Power Supplies

MPM-07S Series
Compact 1 x 2 Inch
7W, Single Output
AC/DC Power Supplies
Key Features:
• 7W Output Power
Electrical Specifications
Specifications typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
• Compact 1 x 2 Inch Case
Parameter
Conditions
Min. Typ. Max. Units
• Universal 85-265 VAC Input
• EN60950 Approved
• Meets EN55022 B
• Meets IEC Safety Class II
Input Voltage Range
Input Frequency
Input Current
Inrush Current
85
265
47
440
See Model Selection Guide
115 VAC
10.0
230 VAC
20.0
VAC
Hz
A Pk
• >280 kHour MTBF
EMI
Safety Ground Leakage Current
Meets CISPR Pub. 22/FCC Class B
115 VAC
230 VAC
0.1
0.3
mA
Output
Parameter
Conditions
Min. Typ. Max. Units
Output Voltage
See Model Selection Guide
Output Current
See Model Selection Guide
Output Voltage Accuracy
±1.0 ±2.0
%
Line Regulation
VIN = Min to Max
±0.5 ±1.0
%
Load Regulation
IO = Min to Max
±0.5 ±1.0
%
Ripple & Noise (20 MHz)
3.3 & 5.0 VDC Output
All Other Outputs
1.5 1.8
0.8
1.0 ^{%VP-P of VO}
Hold-Up Time
115 VAC, 60 Hz
15
mSec
Temperature Coefficient
±0.02
%/°C
Over Voltage Protection
Zener Diode Clamp
120
% of VO
Short Circuit Protection, Note 3
Continuous (Autorecovery)
Overload Protection, Note 4
Typ. 120% to 180% of Output Power
General
Parameter
Conditions
Min. Typ. Max. Units
Isolation Voltage
Input to Output 3,000
VAC
Isolation Test Voltage
Input to Output, Flash Tested For 60S 4,700
VAC
Isolation Resistance
500 VDC 100
MΩ
EMI/RFI
Conducted
EN 55022 Level B
Electrostatic Discharge (ESD)
IEC/EN 61000-4-2 Level B
MicroPower Direct
292 Page Street
Suite D
Stoughton, MA 02072
USA
EMC Compliance
Switching Frequency
Environmental
Parameter
Operating Temperature Range
RF Field Susceptibility
Electrical Fast Transients/Bursts On Mains
Surge
IEC/EN61000-4-3
IEC/EN 61000-4-4 Level 3 2 kV
IEC/EN 61000-4-5 Level 3 1kV/2 kV
100
kHz
Conditions
Min. Typ. Max.
Ambient -25 +25 +71
Units
°C
T: [phone]
F: [phone]
E: [e-mail]
W: www.micropowerdirect.com
Storage Temperature Range
Cooling
Humidity
Physical
-40
+85
°C
Free Air Convection (See Derating Curve)
RH, Non-condensing
95
%
Case Size
2.00 x 1.00 x 0.76 Inches (50.8 x 25.4 x 19.3 mm)
Case Material
Non-Conductive Plastic& Fiberglass (UL94-V0)
Weight
1.55 Oz (44g)
Reliability Specifications
Parameter
Conditions
Min. Typ. Max. Units
MTBF
MIL HDBK 217F, 25°C, Gnd Benign 280
kHours
Safety Standards
IEN 60950, IEC 60950
Safety Approvals
IEN 60950, IEC 60950
Safety Class
IEC 61140 Class II