MPM-05SV Datasheet, PDF (1/4 Pages) MicroPower Direct, LLC – 5W Output Power

MPM-05SVSeries
85 to 305 VAC Input, 5W
Miniature PC Mount
AC/DC Power Supplies
Key Features:
• 5W Output Power
• Universal 85-305 VAC Input
• EN 60950 Approved
• Six Single Output Models
• Meets EN 55022 B
• >300 kHour MTBF
• Compact PC Mount Case
MicroPower Direct
292 Page Street
Suite D
Stoughton, MA 02072
USA
T: [phone]
F: [phone]
E: [e-mail]
W: www.micropowerdirect.com
Electrical Specifications
Specifications typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
Parameter
Conditions
Min. Typ. Max. Units
Input Voltage Range
85
305
VAC
100
430
VDC
Input Frequency
47
63
Hz
Input Current
See Model Selection Guide
Inrush Current
115 VAC
10.0
230 VAC
15.0
A Pk
Leakage Current
230 VAC/50 Hz
0.3
mA rms
Output
Parameter
Conditions
Min. Typ. Max. Units
Output Voltage
See Model Selection Guide
Output Current
See Model Selection Guide
Minimum Load
0
%
Output Voltage Accuracy
±2.0
%
Line Regulation
VIN = Min to Max
±0.5
%
Load Regulation
See Note 2
±1.0
%
Ripple & Noise (20 MHz)
See Note 3
50 100 mV Pk - Pk
Hold-Up Time
115 VAC
15
230 VAC
80
mSec
Temperature Coefficient
±0.02
%/°C
Short Circuit Protection
Continuous (Autorecovery)
Overload Protection
Autorecovery
110
%
General
Parameter
Conditions
Min. Typ. Max. Units
Isolation Voltage
Input to Output, 60S 3,000
VAC
Input to FG, 60S 2,000
Switching Frequency
65 132
kHz
Environmental
Parameter
Conditions
Min. Typ. Max. Units
Operating Temperature Range
Ambient -40 +25 +70
°C
Storage Temperature Range
-40
+105
°C
Cooling
Free Air Convection (See Derating Curve)
Humidity
RH, Non-condensing
95
%
Physical
Case Size
See Mechanical Diagram On Page 4
Case Material
Non-Conductive Black Plastic (UL94-V0)
Weight
2.64 Oz (75g)
Reliability Specifications
Parameter
Conditions
Min. Typ. Max. Units
MTBF
MIL HDBK 217F, 25°C, Gnd Benign 300
kHours
Lead Temperature, See Note 4
Wave Solder
Hand Solder
260
°C
360
Safety Standards
UL 60950, EN 60950
Safety Class
Class I
www.micropowerdirect.com