MPM-05M Datasheet, PDF (1/4 Pages) MicroPower Direct, LLC – 5W Output Power

MPM-05M Series
Compact Encapsulated,
Medical Approved, 5W
AC/DC Power Supplies
Key Features:
Electrical Specifications
• 5W Output Power
• EN 60601-1 3^RD Edition
Specifications typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
Parameter
Conditions
Min. Typ. Max. Units
• Universal 85-264 VAC Input
• Reinforced Insulation (2xMOPP) ^{Input Voltage Range}
85
264
VAC
100
370
VDC
• Meets IEC Safety Class II Input Frequency
47
63
Hz
• Short Circuit Protection
• Over Current Protection
Inrush Current, See Note 2
115 VAC
10
230 VAC
20
A Pk
• Over Voltage Protection
• Low Leakage Current
• -25°C to +70°C Operation
No Load Power Consumption
Output
Parameter
Output Voltage Accuracy
Conditions
0.3
Min. Typ. Max.
±2.0
W
Units
%
Line Regulation
VIN = Min to Max
±0.5
%
Load Regulation
IOUT = 10% to 100%
±1.0
%
Ripple & Noise (20 MHz)
See Note 3
50 100 mV Pk-Pk
Hold-Up Time
115 VAC, 60 Hz
10
mS
230 VAC, 50 Hz
80
Temperature Coefficient
±0.02
%/°C
Overload Protection
Autorecovery 110
280
% INOM
Short Circuit Protection
Continuous (Autorecovery)
General
Parameter
Conditions
Min. Typ. Max. Units
Isolation Voltage
Leakage Current
Isolation Resistance
Switching Frequency
Environmental
Input to Output, 60S 4,000
80
500 VDC 1,000
140
VAC rms
µA
M⍀
kHz
Parameter
Conditions
Min. Typ. Max. Units
MicroPower Direct
292 Page Street
Suite D
Stoughton, MA 02072
USA
Operating Temperature Range
Maximum Case Temperature
Storage Temperature Range
Cooling
Humidity
Lead Temperature
Physical
Case Size
Case Material
Ambient -25 +25 +70
Case
+95
-40
+95
Free Air Convection (See Derating Curve)
RH, Non-condensing
95
260
See Note 4
360
°C
°C
°C
%RH
°C
See Mechanical Diagram (Page 4)
Non-Conductive Plastic Resin (UL94-V0)
T: [phone]
F: [phone]
E: [e-mail]
W: www.micropowerdirect.com
Weight
Reliability Specifications
Parameter
MTBF
1.52 Oz (43g)
Conditions
Min. Typ. Max.
MIL HDBK 217F, 25°C, Gnd Benign 300
Units
kHours
Safety Standards
Safety Class
Insulation Level
UL 60601, EN 60601
Class II
2XMOPP
www.micropowerdirect.com