MPE-25S Datasheet, PDF (1/2 Pages) MicroPower Direct, LLC – Single Output, 25W Compact, Enclosed AC/DC Power Supplies

MPE-25S Series
Single Output, 25W
Compact, Enclosed
AC/DC Power Supplies
Electrical Specifications
Key Features:
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
• 25W Output Power
Parameter
Conditions
Min. Typ. Max. Units
• Universal 85-264 AC Input
• EN60950 Approved
Input Voltage Range
Input Frequency
Universal 85
120
47
264
VAC
370
VDC
63
Hz
• Four Single Output Models Input Current
See Model Selection Guide
• Meets EN55022
• >325 kHour MTBF
• Compact Metal Enclosure
Inrush Current
Safety Ground Leakage Current
Output
Cold Start, 115 VAC
Cold Start, 230 VAC
115 VAC
230 VAC
15.0
30.0
0.45
0.75
A Pk
mA
Parameter
Conditions
Min. Typ. Max. Units
Output Voltage
See Model Selection Guide
Output Current
See Model Selection Guide
Output Voltage Adjustment
See Model Selection Guide
Output Voltage Tolerance, See Note 1
See Model Selection Guide
Ripple & Noise (20 MHz) , See Note 2
See Model Selection Guide
RoHS Compliant ^{Hold-Up Time}
115 VAC
12
230 VAC
80
mSec
Set-Up Time
115 VAC
800
230 VAC
300
mSec
Rise Time
115 VAC
50
230 VAC
50
mSec
Temperature Coefficient
±0.02
%/°C
Short Circuit Protection
Continuous (Autorecovery)
Over Voltage Protection
See Note 3 115
135 % Vout
Overload Protection
See Note 4 135
165 % Iout
General
Parameter
Conditions
Min. Typ. Max. Units
Input to Output 3,000
Isolation Voltage
Input to Ground 1,500
VAC
Output to Ground 500
Isolation resistance
500 VDC
100
MΩ
EMI/RFI
Conducted
EN 55022; EN 61000-3-2, -3
Electrostatic Discharge (ESD)
IEC/EN 61000-4-2, -6, -8, -11
MicroPower Direct _{EMC Compliance}
292 Page Street
Suite D
RF Field Susceptibility
Electrical Fast Transients/Bursts On Mains
Surge
IEC/EN61000-4-3
IEC/EN 61000-4-4
IEC/EN 61000-4-5
Stoughton, MA 02072
Switching Frequency
56
kHz
USA
Environmental
Parameter
Conditions
Min. Typ. Max. Units
T: [phone]
Operating Temperature Range
Ambient -10 +25 +60
°C
F: [phone]
Storage Temperature Range
E: [e-mail] _Cooling
W: www.micropowerdirect.com _Humidity
-20
+85
°C
Free Air Convection (See Derating Curve)
RH, Non-condensing 20
90
%
Physical
Case Size
3.90 x 3.82 x 1.42 Inches (99.0 x 97.0 x 36.0 mm)
Case Material
Vented Metal Enclosure
Weight
13.7 Oz (0.39 kg)
Reliability Specifications
Parameter
Conditions
Min. Typ. Max. Units
MTBF
MIL HDBK 217F, 25°C, Gnd Benign 325
kHours
Safety Standards
IEN 60950, IEC 60950
Vibration
10~500 Hz, 2G 10 min/1 Cycle. Period of 60 min each along X, Y &Z Axis