MPE-100FS Datasheet, PDF (1/2 Pages) MicroPower Direct, LLC – Single Output, 100W Compact, Enclosed AC/DC Power Supplies

MPE-100FS Series
Single Output, 100W
Compact, Enclosed
AC/DC Power Supplies
Key Features:
Electrical Specifications
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
• 100W Output Power
Parameter
Conditions
Min. Typ. Max. Units
• Selectable 88-264 AC Input
Input Voltage Range
• EN60950 Approved
Switch Selectable
88
176
115
220
132
264
248
370
VAC
VDC
• Wide Temp Operation
Input Frequency
47
63
Hz
• Seven Single Output Models ^{Input Current}
• Meets EN55022
Inrush Current
See Model Selection Guide
Cold Start, 115 VAC
30.0
Cold Start, 230 VAC
60.0
A Pk
• >300 kHour MTBF
Safety Ground Leakage Current
• Compact Metal Enclosure _Output
115 VAC
240 VAC
0.7
1.0
mA
Parameter
Conditions
Min. Typ. Max. Units
Output Voltage
See Model Selection Guide
Output Current
See Model Selection Guide
Output Voltage Adjustment
See Model Selection Guide
Output Voltage Tolerance, See Note 1
See Model Selection Guide
Ripple & Noise (20 MHz), See Note 2
See Model Selection Guide
Hold-Up Time
115 VAC
15
230 VAC
20
mSec
Set-Up Time
230 VAC
1,000
mSec
Rise Time
230 VAC
30
mSec
Temperature Coefficient
±0.02
%/°C
Short Circuit Protection
Continuous (Autorecovery)
Over Voltage Protection
See Note 3 115
135
%
Overload Protection
See Note 4 135
165
%
RoHS Compliant
General
Parameter
Conditions
Min. Typ. Max. Units
Input to Output 3,000
Isolation Voltage
Input to Ground 1,500
VAC
Output to Ground 500
Isolation resistance
500 VDC
100
MΩ
EMI/RFI
Conducted
EN 55022; EN 61000-3-2, -3
Electrostatic Discharge (ESD)
IEC/EN 61000-4-2, -6, -8, -11
MicroPower Direct
292 Page Street
Suite D
Stoughton, MA 02072
USA
EMC Compliance
Switching Frequency
Environmental
Parameter
RF Field Susceptibility
Electrical Fast Transients/Bursts On Mains
Surge
IEC/EN61000-4-3
IEC/EN 61000-4-4
IEC/EN 61000-4-5
75
kHz
Conditions
Min. Typ. Max. Units
T: [phone]
F: [phone]
E: [e-mail]
W: www.micropowerdirect.com
Operating Temperature Range
Storage Temperature Range
Cooling
Humidity
Physical
Ambient -10 +25 +60
°C
-20
+85
°C
Free Air Convection
RH, Non-condensing
95
%
Case Size
7.83 x 3.86 x 1.50 Inches (199.0 x 98.0 x 38.0 mm)
Case Material
Vented Metal Enclosure
Weight
22.9 Oz (0.65 kg)
Reliability Specifications
Parameter
Conditions
Min. Typ. Max. Units
MTBF
MIL HDBK 217F, 25°C, Gnd Benign 300
kHours
Safety Standards
CAN/CSA-C22.2 No 60950-1-03, ANSI/UL Std No 60950-1, IEC 60950
Vibration
10~500 Hz, 2G 10 min/1 Cycle. Period of 60 min each along X, Y &Z Axis