ME100S Datasheet, PDF (1/2 Pages) MicroPower Direct, LLC – ME100S SERIES

ME100S Series
Low Cost, 1W
Ultra-Miniature SIP
DC/DC Converters
Electrical Specifications
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Key Features:
• 1W Output Power
Input
Parameter
Conditions
Min. Typ. Max.
3.3 VDC Input 2.97 3.3 3.63
Units
• Ultra-Miniature SIP Case
• 35 Standard Models
• 1,000 VDC Isolation
• >1.1 MHour MTBF
• -40°C to +85°C Operation
Input Voltage Range
Input Reflected Ripple Current
Input Filter
Output
Parameter
5 VDC Input 4.50 5.0
12 VDC Input 10.80 12.0
24 VDC Input 21.60 24.0
48 VDC Input 43.20 48.0
20
Internal Capacitor
5.50
13.20
26.40
52.80
VDC
mA P - P
Conditions
Min. Typ. Max. Units
Output Voltage Accuracy
±3.0
%
Line Regulation
Load Regulation, See Note 1
For VIN Change of 1%
±1.2
%
See Model Selection Guide
Ripple & Noise (20 MHz)
100
mV P - P
Temperature Coefficient
±0.02
%/°C
Output Short Circuit
General
Parameter
Momentary (0.5 Sec.)
Conditions
Min. Typ. Max.
Units
Isolation Voltage
Isolation Resistance
60 Seconds 1,000
500 VDC 1,000
VDC
M
Isolation Capacitance
100 kHz, 1V
60
pF
Switching Frequency
80
kHz
EMI Characteristics, See Note 3
Parameter
Conditions
Min. Typ. Max. Units
Radiated Emissions
EN 55022
Class B
Conducted Emissions
EN 55022
Class B
ESD
EN 61000-4-2 Criteria A; ±8 kV Air/±6 kV Contact
RS
EN 61000-4-3
Criteria A; 10V/m
EFT
EN 61000-4-4
Criteria A; ±2 kV
Surge
EN 61000-4-5
Criteria A; ±0.5 kV
CS
EN 61000-4-6
Criteria A; 10 Vrms
PFMF
Environmental
Parameter
EN 61000-4-8
Criteria A; 1A/m
Conditions
Min. Typ. Max. Units
Operating Temperature Range
Ambient -40
+85
°C
Operating Temperature Range
Case
+100
°C
Storage Temperature Range
-40
+125
°C
Cooling
Free Air Convection
Humidity
RH, Non-condensing
95
%
Physical
MicroPower Direct
292 Page Street
Suite D
Stoughton, MA 02072
USA
T: [phone]
F: [phone]
E: [e-mail]
W: www.micropowerdirect.com
Case Size
Case Material
Weight
Reliability Specifications
Parameter
MTBF
Absolute Maximum Ratings
Parameter
Input Voltage Surge (1 Sec)
48 VIN Models
All Other Models
0.46 x 0.29 x 0.40 Inches (11.68 x 7.5 x 10.2 mm)
0.46 x 0.24 x 0.40 Inches (11.68 x 6.0 x 10.2 mm)
Non-Conductive Black Plastic (UL-94V0)
0.05 Oz (1.5g)
Conditions
Min. Typ. Max.
MIL HDBK 217F, 25°C, Gnd Benign 1.121
Units
MHours
Conditions
Min. Typ. Max.
3.3 VDC Input -0.0
6.0
5 VDC Input -0.0
7.0
12 VDC Input -0.0
15.0
Units
VDC
24 VDC Input -0.0
28.0
48 VDC Input -0.0
54.0
Lead Temperature
1.5 mm From Case For 10 Sec
260
°C
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.
www.micropowerdirect.com