MA1000RW Datasheet, PDF (1/2 Pages) MicroPower Direct, LLC – MA1000RW SERIES

MA1000RW_Series
2:1 Input Range, 10W
Single & Dual Output
DC/DC Converters
Electrical Specifications
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
Key Features:
• 10W Output Power
Parameter
Input Voltage Range
Conditions
Min.
12 VDC Input 9.0
24 VDC Input 18.0
Typ.
12.0
24.0
Max.
18.0
36.0
Units
VDC
• 2:1 Input Voltage Range
• Compact DIP Case
Input Filter
Input Reflected Ripple Current
48 VDC Input 36.0 48.0 75.0
␲ (Pi) Filter (Meets EN 55022 Class “A”)
35.0
mA P - P
• 1,500 VDC I/O Isolation
Output
• Meets EN 55022 “A”
• Single & Dual Outputs
Parameter
Output Voltage Accuracy
Line Regulation
Conditions
Min.
VIN = Min to Max
Typ.
±1.0
Max.
±0.5
Units
%
%
• Wide Temperature Operation _{Load Regulation, See Note 1}
• Industry Standard Pin-Out
Cross Regulation, Dual Output
Single Output
Dual Output
See Note 2
±0.5
±1.0
%
±5.0
%
Ripple & Noise (20 MHz)
See Note 3
75 mV P - P
Output Power Protection
Temperature Coefficient
150
±0.02
% IOUT
%/ºC
Output Short Circuit Protection
Continuous (Autorecovery)
General
Parameter
Conditions
Min. Typ. Max. Units
Isolation Voltage (Input/Output)
Isolation Voltage (Case/Input, Output)
3 Seconds 1,500
3 Seconds 1,000
VDC
Isolation Resistance
500 VDC 1,000
M⍀
Isolation Capacitance
100 kHz/1V
1,000
pF
Switching Frequency
330
kHz
EMI Characteristics
Parameter
Standard
Level
Radiated Emissions
EN 55022
Class A
Conducted Emissions, See Note 4
EN 55022
Class A
ESD
EN 61000-4-2
Criteria B
RS
EN 61000-4-3
Criteria A
EFT, See Note 4
EN 61000-4-4
Criteria B
Surge, See Note 4
EN 61000-4-5
Criteria B
CS
EN 61000-4-6
Criteria A
PFMF
EN 61000-4-8
Criteria A
Environmental
Parameter
Conditions
Min. Typ. Max. Units
Operating Temperature Range
Ambient -40
+85
ºC
Operating Temperature Range
Case
+100
ºC
Storage Temperature Range
-40
+125
ºC
Cooling
Free Air Convection
Humidity
RH, Non-condensing
95
%
MicroPower Direct
Physical
292 Page Street
Suite D
Stoughton, MA 02072
Case Size
Case Material
Weight
1.25 x 0.80 x 0.40 Inches (31.8 x 20.3 x 10.2 mm)
Copper With Nickel Coating (UL94V-0)
0.60 Oz (17g)
USA
Reliability Specifications
Parameter
Conditions
Min. Typ. Max. Units
T: [phone]
MTBF
MIL HDBK 217F, 25ºC, Gnd Benign 1.0
MHours
F: [phone]
Absolute Maximum Ratings
E: [e-mail] Parameter
Conditions
Min. Typ. Max. Units
W: www.micropowerdirect.com
12 VDC Input -0.7
25.0
Input Voltage Surge (1 Sec)
24 VDC Input -0.7
50.0
VDC
48 VDC Input -0.7
100.0
Lead Temperature
1.5 mm From Case For 10 Sec
260
ºC
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.
www.micropowerdirect.com