LSC200EHI Datasheet, PDF (1/2 Pages) MicroPower Direct, LLC – LSC200EHI SERIES

LSC200EHI Series
Very High Isolation, 2W
Short Circuit Protected
DC/DC Converters
Key Features:
• 2W Output Power
• 6,000 VDC Isolation
• Short Circuit Protected
• -40ºC to 85ºC Operation
• Miniature SMT Case
• 5V, 12 and 24V Inputs
• Nine Standard Models
• 3.5 MH MTBF
• LOW COST!!
Electrical Specifications
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
Parameter
Conditions
Min. Typ. Max. Units
5 VDC Input 4.5 5.0 5.5
Input Voltage Range
12 VDC Input 10.8 12.0 13.2
VDC
24 VDC Input 21.6 24.0 26.4
Input Filter
Internal Capacitor
Output
Parameter
Conditions
Min. Typ. Max. Units
Output Voltage Accuracy
±3.0
%
Line Regulation
For Vin Change of 1%
±1.2
%/%
Load Regulation, 5V Output
Iout = 10% to 100%
±12.8 ±15
%
Load Regulation, 12V Output
Iout = 10% to 100%
±6.8 ±15
%
Load Regulation, 15V Output
Iout = 10% to 100%
±6.3 ±15
%
Ripple & Noise (20 MHz)
See Note 1
150 200 mV P - P
Temperature Coefficient
±0.03 %/ºC
Output Short Circuit
Continuous (Autorecover)
General
Parameter
Conditions
Min. Typ. Max. Units
Isolation Voltage
60 Seconds 6,000
VDC
Isolation Resistance
500 VDC 1,000
M
Isolation Capacitance
100 kHz, 1V
10
pF
Switching Frequency
35
kHz
Environmental
Parameter
Conditions
Min. Typ. Max. Units
Operating Temperature Range
Ambient -40
+85
ºC
Storage Temperature Range
-55
+125
ºC
Cooling
Free Air Convection
Humidity
RH, Non-condensing
95
%
Physical
Case Size
0.94 x 0.60 x 0.295 Inches (23.86 x 15.24 x 7.5 mm)
Case Material
Non-Conductive Black Plastic (UL94-V0)
Weight
0.134 Oz (3.8g)
MicroPower Direct
292 Page Street
Suite D
Stoughton, MA 02072
USA
T: [phone]
F: [phone]
E: [e-mail]
W: www.micropowerdirect.com
Reliability Specifications
Parameter
MTBF
Absolute Maximum Ratings
Parameter
Input Voltage Surge (1 Sec)
Conditions
Min. Typ. Max.
MIL HDBK 217F, 25ºC, Gnd Benign 3.5
Units
MHours
Conditions
Min. Typ. Max.
5 VDC Input -0.7
7.5
12 VDC Input -0.7
15.0
24 VDC Input -0.7
28.0
Units
VDC
Lead Temperature
1.5 mm From Case For 10 Sec.
260
ºC
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.
www.micropowerdirect.com