English
Language : 

I500RU Datasheet, PDF (1/2 Pages) MicroPower Direct, LLC – 4:1 Input, 5W Ultra-Miniature DC/DC Converters
I500RU Series
4:1 Input, 5W
Ultra-Miniature
DC/DC Converters
Key Features:
Electrical Specifications
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
• 5W Output Power
Parameter
Conditions
Min. Typ. Max. Units
• 4:1 Input Range
• Miniature Case
• Single & Dual Outputs
• 1,500 VDC Isolation
• >1 MHour MTBF
• 16 Standard Models
• LOWEST COST!!
Input Voltage Range
Input Filter
Reverse Polarity Input Current
Output
Parameter
Output Voltage Accuracy
24 VDC Input 9.0 24.0 36.0
48 VDC Input 18.0 48.0 72.0
LC Filter
1.0
VDC
A
Conditions
Positive
Negative
Min.
Typ.
±1.0
±3.0
Max.
±3.0
±5.0
Units
%
Output Voltage Balance
Dual Output , Balanced Loads
±1.0
%
Line Regulation
Vin = Min to Max
±0.2 ±0.5
%
Load Regulation
Iout = 10% to 100%
±0.5 ±1.0
Ripple (20 MHz) (Note 1)
30 50 mV P - P
Noise (20 MHz) (Note 1)
75 150 mV P - P
Output Power Protection
120
%
Temperature Coefficient
±0.02 ±0.03 %/ºC
Output Short Circuit
Continuous (Autorecovery)
General
RoHS Compliant Parameter
Conditions
Min. Typ. Max. Units
Isolation Voltage
60 Seconds 1,500
VDC
Isolation Resistance
500 VDC 1,000
MΩ
Isolation Capacitance
100 kHz, 1V
100
pF
Switching Frequency
300
kHz
Environmental
Parameter
Conditions
Min. Typ. Max. Units
Operating Temperature Range
Ambient -40 +25 +85
ºC
Storage Temperature Range
-55
+125
ºC
MicroPower Direct
292 Page Street
Suite D
Stoughton, MA 02072
USA
Cooling
Humidity
Physical
Case Size
Case Material
Free Air Convection
RH, Non-condensing
95
%
1.08 x 1.08 x 0.38 Inches (25.4 x 25.4 x 9.6 mm)
Metal With Non-Conductive Base (UL94-V0)
T: (781) 344-8226
F: (781) 344-8481
E: sales@micropowerdirect.com
W: www.micropowerdirect.com
Weight
Reliability Specifications
Parameter
MTBF
0.52 Oz (15g)
Conditions
Min. Typ. Max.
MIL HDBK 217F, 25ºC, Gnd Benign 1.0
Units
MHours
Absolute Maximum Ratings
Parameter
Conditions
Min. Typ. Max. Units
24 VDC Input -0.7
40.0
48 VDC Input -0.7
80.0
Lead Temperature
1.5 mm From Case For 10 Sec
300
ºC
Internal Power Dissipation
All Models
450
mW
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.