English
Language : 

I500ERW Datasheet, PDF (1/2 Pages) MicroPower Direct, LLC – Ultra-Miniature 5W Single & Dual Output DC/DC Converters
I500ERW Series
Ultra-Miniature 5W
Single & Dual Output
DC/DC Converters
Key Features:
Electrical Specifications
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
• 5W Output Power
• 2:1 Input Range
• Miniature Case
• Single & Dual Outputs
Parameter
Input Voltage Range
Conditions
12 VDC Input
15 VDC Input
24 VDC Input
48 VDC input
Min.
9.0
12.0
18.0
36.0
Typ.
12.0
15.0
24.0
48.0
Max.
18.0
24.0
36.0
72.0
Units
VDC
• 1,500 VDC Isolation
Input Filter
LC Filter
• >1 MHour MTBF
• 32 Standard Models
• LOWEST COST!!
Reverse Polarity Input Current
Output
Parameter
Output Voltage Accuracy
1.0
Conditions
Positive
Negative
Min.
Typ.
±1.0
±3.0
Max.
±3.0
±5.0
A
Units
%
Output Voltage Balance
Dual Output , Balanced Loads
±1.0
%
Line Regulation
Vin = Min to Max
±0.2 ±0.5
%
Load Regulation
Iout = 10% to 100%
±0.5 ±2.0
Ripple (20 MHz) (Note 1)
30 50 mV P - P
Noise (20 MHz) (Note 1)
100 150 mV P - P
Output Power Protection
120
%
Temperature Coefficient
±0.02 ±0.03 %/ºC
Output Short Circuit
Continuous (Autorecovery)
RoHS Compliant General
Parameter
Conditions
Min. Typ. Max. Units
Isolation Voltage
60 Seconds 1,500
VDC
Isolation Resistance
500 VDC 1,000
MΩ
Isolation Capacitance
100 kHz, 1V
150
pF
Switching Frequency
300
kHz
Environmental
Parameter
Conditions
Min. Typ. Max. Units
Operating Temperature Range
Ambient -40 +25 +85
ºC
Storage Temperature Range
-55
+125
ºC
Cooling
Free Air Convection
MicroPower Direct
292 Page Street
Suite D
Stoughton, MA 02072
USA
Humidity
Physical
Case Size (5V 12V & 24V Input Models)
Case Material
Weight
RH, Non-condensing
95
%
1.08 x 1.08 x 0.38 Inches (25.4 x 25.4 x 9.6 mm)
Metal With Non-Conductive Base (UL94-V0)
0.52 Oz (15g)
T: (781) 344-8226
F: (781) 344-8481
E: sales@micropowerdirect.com
W: www.micropowerdirect.com
Reliability Specifications
Parameter
MTBF
Absolute Maximum Ratings
Conditions
Min. Typ. Max. Units
MIL HDBK 217F, 25ºC, Gnd Benign 1.0
MHours
Parameter
Conditions
Min. Typ. Max. Units
12 VDC Input -0.7
20.0
Input Voltage Surge (1 Sec)
15 VDC Input -0.7
24 VDC Input -0.7
30.0
VDC
40.0
48 VDC Input -0.7
80.0
Lead Temperature
1.5 mm From Case For 10 Sec
300
ºC
Internal Power Dissipation
All Models
450
mW
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.