MRF21180 Datasheet, PDF (12/12 Pages) Motorola, Inc – RF Power Field Effect Transistor

Freescale Semiconductor, Inc.
PACKAGE DIMENSIONS
2X Q
A
A
bbb M T A M B M
G4
L
B
1
2
4X K
3
4
4X
D
aaa M T A M B M
ccc M T A M B M
N
(LID)
B
(FLANGE)
ccc M T A M B M
R
(LID)
F
H
C
S
(INSULATOR)
E
PIN 5
T
SEATING
PLANE
M
(INSULATOR)
bbb M T A M B M
bbb M T A M B M
CASE 375D - 04
ISSUE C
NI - 1230
NOTES:
1. INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M−1994.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION H IS MEASURED 0.030 (0.762) AWAY
FROM PACKAGE BODY.
4. RECOMMENDED BOLT CENTER DIMENSION OF
1.52 (38.61) BASED ON M3 SCREW.
INCHES
DIM MIN MAX
A 1.615 1.625
B 0.395 0.405
C 0.150 0.200
D 0.455 0.465
E 0.062 0.066
F 0.004 0.007
G 1.400 BSC
H 0.079 0.089
K 0.117 0.137
L 0.540 BSC
M 1.219 1.241
N 1.218 1.242
Q 0.120 0.130
R 0.355 0.365
S 0.365 0.375
aaa 0.013 REF
bbb 0.010 REF
ccc 0.020 REF
STYLE 1:
PIN 1. DRAIN
2. DRAIN
3. GATE
4. GATE
5. SOURCE
MILLIMETERS
MIN MAX
41.02 41.28
10.03 10.29
3.81 5.08
11.56 11.81
1.57 1.68
0.10 0.18
35.56 BSC
2.01 2.26
2.97 3.48
13.72 BSC
30.96 31.52
30.94 31.55
3.05 3.30
9.01 9.27
9.27 9.53
0.33 REF
0.25 REF
0.51 REF
Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright
licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document.
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including
“Typicals”, must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the
rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part.
MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective
owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
E Motorola Inc. 2004
HOW TO REACH US:
USA / EUROPE / LOCATIONS NOT LISTED:
Motorola Literature Distribution
P.O. Box 5405, Denver, Colorado 80217
1-800-521-6274 or 480-768-2130
JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center,
3-20-1, Minami-Azabu, Minato-ku, Tokyo 106-8573, Japan
81-3-3440-3569
ASIA / PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre,
2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong
852 - 26668334
HOME PAGE: http://motorola.com/semiconductors
MRF21180R6
12
◊ _For
More
Information
On
This
MOTOROLA
Product,
RF
DEVICE MDRAFT2A1180/D
Go to: www.freescale.com