|
MC44BC374T1 Datasheet, PDF (11/26 Pages) Motorola, Inc – No external varicaps diodes/inductor or tuned components | |||
|
◁ |
Characterization Measurement Conditions
12 Characterization Measurement Conditions
Device default configuration unless otherwise specified:
⢠Peak White Clip enable
⢠UHF oscillator ON
⢠Sound and video modulators ON
⢠Sound subcarrier frequency = 5.5Mhz
⢠Sound Oscillator ON
⢠Picture-to-sound carrier ratio = 12dB
⢠Test pattern disabled
⢠All test mode bits are â0â
⢠Frequency from channel 21 to 69
RF Inputs / Output into 75ohm Load using a 75 to 50 ohm transformation. Video Input 1V pk-pk. Audio
pre-emphasis circuit engaged.
Device and Signals Set-up
Video: 10 steps grey scale
No audio
âATTâ bit = 1
No Video signal
No Audio signal
Measurement Set-up
TVOUT output level
Measured picture carrier in dBuV with the HP8596E Spectrum Analyzer
using a 75 to 50 ohm transformation, all cables losses and transformation
pads having been calibrated.
Measurement used as a reference for other tests: TVout_Ref
TVOUT output attenuation
Measure in dBc picture carrier at âATTâ=â1â with reference to picture
carrier at âATTâ=â0â.
Sound Subcarrier Harmonics
Measure in dBc second and third sound harmonics levels in reference to
picture carrier (TVout_Ref).
Video: 10 steps grey scale
No Audio signal
Picture carrier
Sound carrier
Sound
2nd harm
Sound
3rd harm
Fo +5.5Mhz +11Mhz +16.5Mhz
MOTOROLA
MC44BC374T1 Technical Data
11
|
▷ |