T2322 Datasheet, PDF (1/4 Pages) Motorola, Inc – SENSITIVE GATE TRIACs 2.5 AMPERES RMS 200 thru 600 VOLTS

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by T2322/D
Sensitive Gate Triacs
Silicon Bidirectional Triode Thyristors
. . . designed primarily for ac power switching. The gate sensitivity of these triacs
permits the use of economical transistorized or integrated circuit control circuits, and
it enhances their use in low-power phase control and load-switching applications.
• Very High Gate Sensitivity
• Low On-State Voltage at High Current Levels
• Glass-Passivated Chip for Stability
• Small, Rugged Thermopad Construction for Low Thermal Resistance, High Heat
Dissipation and Durability
T2322
T2323
Series*
*Motorola preferred devices
SENSITIVE GATE TRIACs
2.5 AMPERES RMS
200 thru 600 VOLTS
MT2
G
MT2
MT1
MT2
MT1
CASE 77-08
G
(TO-225AA)
STYLE 5
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.)
Rating
Peak Repetitive Off-State Voltage(1)
(TJ = 25 to 100°C, Gate Open)
T2322, T2323
Suffix
B
D
M
Symbol
VDRM
Value
200
400
600
Unit
Volts
RMS On-State Current (TC = 70°C)
(Full-Cycle Sine Wave 50 to 60 Hz)
IT(RMS)
2.5
Amps
Peak Non-repetitive Surge Current
(One Full Cycle, 60 Hz)
Circuit Fusing
(t = 8.3 ms)
ITSM
I2t
25
Amps
2.6
A2s
Peak Gate Power (1 µs)
Average Gate Power (TC = 60°C + 38.3 ms)
Peak Gate Current (1 µs)
Operating Junction Temperature Range
Storage Temperature Range
Mounting Torque (6-32 Screw)(2)
PGM
PG(AV)
IGM
TJ
Tstg
—
10
0.15
0.5
–40 to +110
–40 to +150
8
Watts
Watt
Amp
°C
°C
in. lb.
1. VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
2. Torque rating applies with use of torque washer (Shakeproof WD19523 or equivalent). Mounting Torque in excess of 6 in. lb. does not
appreciably lower case-to-sink thermal resistance. Main terminal 2 and heat-sink contact pad are common.
For soldering purposes (either terminal connection or device mounting), soldering temperatures shall not exceed +200°C, for 10 seconds.
Consult factory for lead bending options.
Preferred devices are Motorola recommended choices for future use and best overall value.
Motorola Thyristor Device Data
1
© Motorola, Inc. 1995