PZT2907AT1 Datasheet, PDF (1/6 Pages) Motorola, Inc – SOT-223 PACKAGE PNP SILICON TRANSISTOR SURFACE MOUNT

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by PZT2907AT1/D
PNP Silicon
Epitaxial Transistor
This PNP Silicon Epitaxial transistor is designed for use in linear and
switching applications. The device is housed in the SOT-223 package which is
designed for medium power surface mount applications.
• NPN Complement is PZT2222AT1
• The SOT-223 package can be soldered using wave or reflow
• SOT-223 package ensures level mounting, resulting in improved thermal
conduction, and allows visual inspection of soldered joints. The formed
leads absorb thermal stress during soldering eliminating the possibility of
damage to the die.
• Available in 12 mm tape and reel
Use PZT2907AT1 to order the 7 inch/1000 unit reel.
Use PZT2907AT3 to order the 13 inch/4000 unit reel.
BASE 1
COLLECTOR
2,4
PZT2907AT1
Motorola Preferred Device
SOT-223 PACKAGE
PNP SILICON
TRANSISTOR
SURFACE MOUNT
4
1
2
3
3
EMITTER
CASE 318E-04, STYLE 1
TO-261AA
MAXIMUM RATINGS (TC = 25°C unless otherwise noted)
Rating
Collector-Emitter Voltage
Collector-Base Voltage
Emitter-Base Voltage
Collector Current
Total Power Dissipation @ TA = 25°C(1)
Derate above 25°C
Operating and Storage Temperature Range
THERMAL CHARACTERISTICS
Thermal Resistance — Junction-to-Ambient (surface mounted)
Lead Temperature for Soldering, 0.0625″ from case
Time in Solder Bath
Symbol
VCEO
VCBO
VEBO
IC
PD
TJ, Tstg
R_θJA
TL
Value
– 60
– 60
– 5.0
– 600
1.5
12
– 65 to 150
83.3
260
10
Unit
Vdc
Vdc
Vdc
mAdc
Watts
mW/°C
°C
°C/W
°C
Sec
DEVICE MARKING
P2F
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
OFF CHARACTERISTICS
Collector-Base Breakdown Voltage (IC = –10 µAdc, IE = 0)
V(BR)CBO – 60
°—°
—
Vdc
Collector-Emitter Breakdown Voltage (IC = 10 mAdc, IB = 0)
V(BR)CEO – 60
—
—
Vdc
Emitter-Base Breakdown Voltage (IE = –10 µAdc, IC = 0)
V(BR)EBO – 5.0 °—°
—
Vdc
Collector-Base Cutoff Current (VCB = – 50 Vdc, IE = 0)
ICBO
—
°—°
–10
nAdc
Collector-Emitter Cutoff Current (VCE = – 30 Vdc, VBE = 0.5 Vdc)
ICEX
—
—
– 50
nAdc
Base-Emitter Cutoff Current (VCE = – 30 Vdc, VBE = – 0.5 Vdc)
IBEX
—
—
– 50
nAdc
1. Device mounted on a glass epoxy printed circuit board 1.575 in. x 1.575 in. x 0.059 in.; mounting pad for the collector lead min. 0.93 sq. in.
Thermal Clad is a trademark of the Bergquist Company
Preferred devices are Motorola recommended choices for future use and best overall value.
REV 4
©MMoottooroollaa, ISncm. 1a9l9l–6Signal Transistors, FETs and Diodes Device Data
1