MUR120 Datasheet, PDF (1/6 Pages) Motorola, Inc – ULTRAFAST RECTIFIERS 1.0 AMPERE 200-400-600 VOLTS

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MUR120/D
SWITCHMODE™ Power Rectifiers
. . . designed for use in switching power supplies, inverters and as free
wheeling diodes, these state–of–the–art devices have the following features:
• Ultrafast 25, 50 and 75 Nanosecond Recovery Times
• 175°C Operating Junction Temperature
• Low Forward Voltage
• Low Leakage Current
• High Temperature Glass Passivated Junction
• Reverse Voltage to 600 Volts
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 0.4 gram (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal Leads are
Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes: 220°C
Max. for 10 Seconds, 1/16″ from case
• Shipped in plastic bags, 1000 per bag
• Available Tape and Reeled, 5000 per reel, by adding a “RL’’ suffix to the
part number
• Polarity: Cathode Indicated by Polarity Band
• Marking: U120, U140, U160
MUR120
MUR140
MUR160
MUR120, MUR140 and MUR160 are
Motorola Preferred Devices
ULTRAFAST RECTIFIERS
1.0 AMPERE
200–400–600 VOLTS
CASE 59–04
PLASTIC
MAXIMUM RATINGS
Rating
Symbol
120
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(Square Wave Mounting Method #3 Per Note 1)
VRRM
VRWM
VR
IF(AV)
200
1.0 @ TA = 130°C
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions, halfwave,
single phase, 60 Hz)
IFSM
Operating Junction Temperature and
Storage Temperature
TJ, Tstg
THERMAL CHARACTERISTICS
Maximum Thermal Resistance, Junction to Ambient
ELECTRICAL CHARACTERISTICS
R_θJA
Maximum Instantaneous Forward Voltage (1)
vF
(iF = 1.0 Amp, TJ = 150°C)
(iF = 1.0 Amp, TJ = 25°C)
Maximum Instantaneous Reverse Current (1)
iR
(Rated dc Voltage, TJ = 150°C)
(Rated dc Voltage, TJ = 25°C)
Maximum Reverse Recovery Time
trr
(IF = 1.0 Amp, di/dt = 50 Amp/µs)
(IF = 0.5 Amp, iR = 1.0 Amp, IREC = 0.25 A)
Maximum Forward Recovery Time
tfr
(IF = 1.0 A, di/dt = 100 A/µs, IREC to 1.0 V)
(1) Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%.
0.710
0.875
50
2.0
35
25
25
SWITCHMODE is a trademark of Motorola, Inc.
Preferred devices are Motorola recommended choices for future use and best overall value.
MUR
140
160
400
600
1.0 @ TA = 120°C
35
*65 to +175
See Note 1
1.05
1.25
150
5.0
75
50
50
Unit
Volts
Amps
Amps
°C
°C/W
Volts
µA
ns
ns
Rev 3
©^RM^eo^cto^trⁱo^fil^ea,^rIn^Dc^e. 1^v9^ic96^{e Data}
1