English
Language : 

MUR10150E Datasheet, PDF (1/4 Pages) Motorola, Inc – SCANSWITCH RECTIFIER 10 AMPERES 1500 VOLTS
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MUR10150E/D
™ Designer's Data Sheet
SCANSWITCH™ Power Rectifier
For Use As A Damper Diode
In High and Very High Resolution Monitors
MUR10150E
Motorola Preferred Device
The MUR10150E is a state-of-the-art Power Rectifier specifically designed for use as a
damper diode in horizontal deflection circuits for high and very high resolution monitors. In these
applications, the outstanding performance of the MUR10150E is fully realized when paired with
either the MJW16212 or MJF16212 monitor specific, 1500 V bipolar power transistor.
• 1500 V Blocking Voltage
• 20 mJ Avalanche Energy Guaranteed
• Peak Transient Overshoot Voltage Specified, 14 Volts (typical)
• Forward Recovery Time Specified, 135 ns (typical)
• Epoxy Meets UL94, VO at 1/8″
Mechanical Characteristics
• Case: Epoxy, Molded
1
• Weight: 1.9 grams (approximately)
4
• Finish: All External Surfaces Corrosion Resistant and Terminal
3
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes: 260°C Max. for 10
Seconds
• Shipped 50 units per plastic tube
• Marking: U10150E
SCANSWITCH
RECTIFIER
10 AMPERES
1500 VOLTS
4
1
CASE 221B–03
3
(TO–220AC)
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current, (Rated VR), TC = 125°C
Peak Repetitive Forward Current, Per Leg
(Rated VR, Square Wave, 20 kHz), TC = 125°C
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
VRRM
VRWM
VR
IF(AV)
IFRM
IFSM
1500
10
20
100
Volts
Amps
Amps
Amps
Operating Junction and Storage Temperature
Controlled Avalanche Energy
THERMAL CHARACTERISTICS
TJ, Tstg
–65 to +125
°C
WAVAL
20
mJ
Thermal Resistance — Junction to Case
ELECTRICAL CHARACTERISTICS
RθJC
2.0
°C/W
Characteristic
Symbol
Typ
Max
Unit
Maximum Instantaneous Forward Voltage (1)
(iF = 6.5 Amps, TJ = 125°C)
(iF = 6.5 Amps, TJ = 25°C)
vF
Volts
1.7
2.2
1.9
2.4
Maximum Instantaneous Reverse Current (1)
(Rated dc Voltage, TJ = 125°C)
(Rated dc Voltage, TJ = 25°C)
iR
µA
750
1000
25
100
Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amps/µs)
trr
150
175
ns
Maximum Forward Recovery Time (IF = 6.5 Amps, di/dt = 12 Amps/µs)
tfr
135
175
ns
Peak Transient Overshoot Voltage
(1) Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%
VRFM
14
16
Volts
SCANSWITCH is a trademark of Motorola, Inc.
Designer’s Data for “Worst Case” Conditions — The Designer’s Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit
curves — representing boundaries on device characteristics — are given to facilitate “worst case” design.
Preferred devices are Motorola recommended choices for future use and best overall value.
Rev 1
©RMeoctotriofilea,rInDce. 1v9ic96e Data
1