MSRB8601 Datasheet, PDF (1/6 Pages) Motorola, Inc – SOFT RECOVERY POWER RECTIFIER 8.0 AMPERES 600 VOLTS

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MSRB860–1/D
Product Preview
SWITCHMODE™
Soft Recovery Power Rectifier
D2PAK–SL Straight Lead
Designed for use as free wheeling diodes in variable speed motor control
applications and other average frequency switching power supplies. These
state–of–the–art devices have the following features:
• Soft Recovery with Guaranteed Low Reverse Recovery
Charge (QRR) and Peak Reverse Recovery Current (IRRM)
• 150°C Operating Junction Temperature
• Epoxy meets UL94, VO @ 1/8″
• Low Forward Voltage
• Low Leakage Current
• High Temperature Glass Passivated Junction
Mechanical Characteristics:
• Case: Molded Epoxy
• Weight: 1.9 Grams (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal Leads Readily Solderable
• Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
• Shipped in 50 Units per Plastic Tube
• Marking: MSRB860
MSRB860-1
SOFT RECOVERY
POWER RECTIFIER
8.0 AMPERES
600 VOLTS
CASE 418C–01, Style 2
D2PAK–SL
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current (At Rated VR, TC = 125°C)
Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz, TC = 125°C)
Non–Repetitive Peak Surge Current
(Surge applied at rated load conditions, halfwave, single phase, 60 Hz)
Storage / Operating Case Temperature
Operating Junction Temperature
THERMAL CHARACTERISTICS
Symbol
VRRM
VRWM
VR
IO
IFRM
IFSM
Tstg, TC
TJ
Value
600
8.0
16
100
– 65 to 150
– 65 to 150
Thermal Resistance — Junction–to–Case
Thermal Resistance — Junction–to–Ambient
ELECTRICAL CHARACTERISTICS
R_qJC
1.6
R_qJA
72.8
Maximum Instantaneous Forward Voltage (1) (IF = 8.0 A)
Typical
VF
TJ = 25°C TJ = 150°C
1.7
1.3
1.4
1.1
Maximum Instantaneous Reverse Current (VR = 600 V)
Typical
IR
TJ = 25°C TJ = 150°C
10
1000
2.0
80
Maximum Reverse Recovery Time (2) (VR = 400 V, IF = 8.0 A, di/dt = 200 A/ms)
Typical
trr
TJ = 25°C TJ = 125°C
120
190
95
125
Typical Recovery Softness Factor (VR = 400 V, IF = 8.0 A, di/dt = 200 A/ms)
s = tb/ta
2.5
3.0
Typical Peak Reverse Recovery Current (VR = 400 V, IF = 8.0 A, di/dt = 200 A/ms)
IRRM
5.8
8.3
Typical Reverse Recovery Charge (VR = 400 V, IF = 8.0 A, di/dt = 200 A/ms)
QRR
350
700
This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice.
(1) Pulse Test: Pulse Width ≤ 380 µs, Duty Cycle ≤ 2%
(2) TRR measured projecting from 25% of IRRM to zero current
Switchmode is a trademark of Motorola, Inc.
Unit
V
A
A
A
°C
°C
°C/W
V
mA
ns
A
nC
© ^MMo^oto^toro^rl^oa,^laInc^R. ^e19^c9^ti7^{fier Device Data}
1