English
Language : 

MRFIC2002 Datasheet, PDF (1/6 Pages) Motorola, Inc – 900 MHz TX-MIXER SILICON MONOLITHIC INTEGRATED CIRCUIT
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
The MRFIC Line
900 MHz Transmit Mixer
The MRFIC2002 is a double-balanced, active mixer designed for transmitters
operating in the 800 MHz to 1.0 GHz frequency range. The design utilizes
Motorola’s advanced MOSAIC 3 silicon bipolar RF process to yield superior
performance in a cost effective monolithic device. Applications for the
MRFIC2002 include CT1 and CT2 cordless telephones, GSM, remote controls,
video and audio short range links, low cost cellular radios, and ISM band
transmitters. A power down control is provided to minimize current drain with
minimum recovery / turn-on time.
• Conversion Gain = 10 dB (Typ)
• Supply Current = 5.5 mA (Typ)
• Power Down Supply Current = 2.0 µA (Max)
• LO-RF Isolation = 25 dB (Typ)
• Low LO Drive Required = –10 dBm (Typ)
• LO Impedance Insensitive to Power Down
• No Matching Required for RF OUT Port
• All Ports are Single Ended
• Order MRFIC2002R2 for Tape and Reel.
R2 Suffix = 2,500 Units per 12 mm, 13 inch Reel.
• Device Marking = M2002
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Supply Voltage
VCC
Control Voltages
ENABLE, VRAMP
Input Power, LO and IF Ports
PLO, PIF
Operating Ambient Temperature
TA
Storage Temperature
Tstg
Order this document
by MRFIC2002/D
MRFIC2002
900 MHz TX-MIXER
SILICON MONOLITHIC
INTEGRATED CIRCUIT
CASE 751-05
(SO-8)
Value
5.5
5.0
+10
– 35 to + 85
– 65 to +150
Unit
Vdc
Vdc
dBm
°C
°C
IF IN 1
VRAMP(1) 2
GND 3
BIAS
CNTL
8 LO IN
7 VCC
6 GND
ENABLE 4
5 RF OUT
(1) For CT2 applications, apply ramp voltage provided in MRFIC2004. For non-CT2, leave open circuited.
Pin Connections and Functional Block Diagram
REV 2
©MMOotoTrOolaR, OIncL.A19R97F DEVICE DATA
MRFIC2002
1