MPIC2111 Datasheet, PDF (1/6 Pages) Motorola, Inc – HALF-BRIDGE DRIVER

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Power Products Division
Advance Information
HALF-BRIDGE DRIVER
The MPIC2111 is a high voltage, high speed, power MOSFET and IGBT driver
with dependent high and low side referenced output channels designed for half–
bridge applications. Proprietary HVIC and latch immune CMOS technologies en-
able ruggedized monolithic construction. Logic input is compatible with standard
CMOS outputs. The output drivers feature a high pulse current buffer stage de-
signed for minimum driver cross–conduction. Internal deadtime is provided to
avoid shoot–through in the output half–bridge. The floating channel can be used to
drive an N–channel power MOSFET or IGBT in the high side configuration which
operates from 10 to 600 volts.
• Floating Channel Designed for Bootstrap Operation
• Fully Operational to +600 V
• Tolerant to Negative Transient Voltage
• dV/dt Immune
• Gate Drive Supply Range from 10 to 20 V
• Undervoltage Lockout for Both Channels
• CMOS Schmitt–triggered Inputs with Pull–down
• Matched Propagation Delay for Both Channels
• Internally Set Deadtime
• High Side Output in Phase with Input
VOFFSET
PRODUCT SUMMARY
600 V MAX
IO+/–
200 mA/420 mA
VOUT
10 – 20 V
ton/off (typical)
130 & 90 ns
Deadtime (typical)
700 ns
Order this document
by MPIC2111/D
MPIC2111
HALF–BRIDGE DRIVER
8
1
P SUFFIX
PLASTIC PACKAGE
CASE 626–05
8
1
D SUFFIX
PLASTIC PACKAGE
CASE 751–05
(SO–8)
ORDERING INFORMATION
Device
MPIC2111D
Package
SOIC
MPIC2111P
PDIP
VCC 1
IN 2
COM 3
LO ⁴
8 ^VB
7 HO
6 VS
5
8 LEADS DIP
MPIC2111P
PIN CONNECTIONS
(TOP VIEW)
VCC 1
IN ²
COM 3
LO ⁴
8 ^VB
7 HO
6 VS
5
8 LEAD SOIC
MPIC2111D
This document contains information on a new product. Specifications and information herein are subject
to change without notice.
REV 1
© ^MMo^oto^toro^rl^oa,^laInc^P.^o19^w9^e6^{r Products Division Advanced Data}
1