English
Language : 

MPC942C Datasheet, PDF (1/4 Pages) Motorola, Inc – LOW VOLTAGE 1:18 CLOCK DISTRIBUTION CHIP
MOTOROLA
Freescale Semiconductor, Inc.
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MPC942C/D
Low Voltage 1:18 Clock
Distribution Chip
MPC942C
The MPC942 is a 1:18 low voltage clock distribution chip with 2.5V or
3.3V LVCMOS output capabilities. The device is offered in two versions;
the MPC942C has an LVCMOS input clock while the MPC942P has a
LVPECL input clock. The 18 outputs are 2.5V or 3.3V LVCMOS
compatible and feature the drive strength to drive 50Ω series or parallel
terminated transmission lines. With output–to–output skews of 200ps, the
MPC942 is ideal as a clock distribution chip for the most demanding of
synchronous systems. The 2.5V outputs also make the device ideal for
supplying clocks for a high performance Pentium II™ microprocessor
based design.
LOW VOLTAGE
1:18 CLOCK
DISTRIBUTION CHIP
• LVCMOS/LVTTL Clock Input
• 2.5V LVCMOS Outputs for Pentium II Microprocessor Support
• 150ps Maximum Targeted Output–to–Output Skew
• Maximum Output Frequency of 250MHz @ 3.3 VCC
• 32–Lead TQFP Packaging
• Single 3.3V or 2.5V Supply
With a low output impedance (≈12Ω), in both the HIGH and LOW logic
states, the output buffers of the MPC942 are ideal for driving series
terminated transmission lines. With an output impedance of 12Ω the
MPC942 can drive two series terminated transmission lines from each
output. This capability gives the MPC942 an effective fanout of 1:36. The
MPC942 provides enough copies of low skew clocks for most high
performance synchronous systems.
FA SUFFIX
32–LEAD TQFP PACKAGE
CASE 873A–02
The LVCMOS/LVTTL input of the MPC942C provides a more standard LVCMOS interface. The OE pins will place the outputs
into a high impedance state. The OE pin has an internal pullup resistor.
The MPC942 is a single supply device. The VCC power pins require either 2.5V or 3.3V. The 32–lead TQFP package was
chosen to optimize performance, board space and cost of the device. The 32–lead TQFP has a 7x7mm body size with a
conservative 0.8mm pin spacing.
Pentium II is a trademark of Intel Corporation.
02/01
© Motorola, Inc. 2001
For
1
MorGeoIntfoo:rwmwatwio.fnreOenscTahlies.cPRorEomVd0uct,