MOC8106 Datasheet, PDF (1/6 Pages) Motorola, Inc – 6-Pin DIP Optoisolators for Power Supply Applications(No Base Connection)

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
GlobalOptoisolator™
6-Pin DIP Optoisolators
for Power Supply Applications
(No Base Connection)
The MOC8106, MOC8107 and MOC8108 devices consist of a gallium
arsenide LED optically coupled to a silicon phototransistor in a dual–in–line
package.
• Closely Matched Current Transfer Ratio (CTR) Minimizes Unit–to–Unit Variation
• Narrow (CTR) Windows that translate to a Narrow and Predictable Open Loop Gain
Window
• Very Low Coupled Capacitance along with No Chip to Pin 6 Base Connection for
Minimum Noise Susceptibility
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix “V” must be included at end of part number. VDE 0884 is a test option.
Applications
• Switchmode Power Supplies (Feedback Control)
• AC Line/Digital Logic Isolation
• Interfacing and coupling systems of different potentials and impedances
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
INPUT LED
Forward Current — Continuous
Forward Current — Peak (PW = 100 µs, 120 pps)
Reverse Voltage
LED Power Dissipation @ TA = 25°C
Derate above 25°C
IF
IF(pk)
VR
PD
60
mA
1
A
6
Volts
120
mW
1.41
mW/°C
OUTPUT TRANSISTOR
Collector–Emitter Voltage
Emitter–Collector Voltage
Collector Current — Continuous
Detector Power Dissipation @ TA = 25°C
Derate above 25°C
VCEO
VECO
IC
PD
70
Volts
7
Volts
150
mA
150
mW
1.76
mW/°C
TOTAL DEVICE
Input–Output Isolation Voltage(1)
(f = 60 Hz, t = 1 sec.)
VISO
7500
Vac(pk)
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
PD
250
mW
2.94
mW/°C
Ambient Operating Temperature Range(2)
Storage Temperature Range(2)
TA
– 55 to +100
°C
Tstg – 55 to +150
°C
Lead Soldering Temperature
(1/16″ from case, 10 sec. duration)
TL
260
°C
1. Input–Output Isolation Voltage, VISO, is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4 and 5 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
GlobalOptoisolator is a trademark of Motorola, Inc.
Order this document
by MOC8106/D
MOC8106
[CTR = 50–150%]
MOC8107
[CTR = 100–300%]
MOC8108
[CTR = 250–600%]
STYLE 3 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
SCHEMATIC
1
NC
6
2
5
3
NC
4
PIN 1. ANODE
2. CATHODE
3. NO CONNECTION
4. EMITTER
5. COLLECTOR
6. NO CONNECTION
REV 3
©^MM^oot^to^or^ro^ola^l,^aIn^Oc.^p1^t9^o9^e7^{lectronics Device Data}
1