English
Language : 

MOC8101 Datasheet, PDF (1/4 Pages) Motorola, Inc – 6-Pin DIP Optoisolators for Power Supply Applications(No Base Connection)
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
GlobalOptoisolator™
6-Pin DIP Optoisolators
for Power Supply Applications
(No Base Connection)
The MOC8101, MOC8102, MOC8103, MOC8104 and MOC8105 devices
consist of a gallium arsenide LED optically coupled to a silicon phototransistor
in a dual–in–line package.
• Closely Matched Current Transfer Ratio (CTR) Minimizes Unit–to–Unit Variation
• Narrow (CTR) Windows that translate to a Narrow and Predictable Open Loop Gain
Window
• Very Low Coupled Capacitance along with No Chip to Pin 6 Base Connection for
Minimum Noise Susceptibility
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix “V” must be included at end of part number. VDE 0884 is a test option.
Applications
• Switchmode Power Supplies (Feedback Control)
• AC Line/Digital Logic Isolation
• Interfacing and coupling systems of different potentials and impedances
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
INPUT LED
Forward Current — Continuous
Forward Current — Peak (PW = 100 µs, 120 pps)
Reverse Voltage
LED Power Dissipation @ TA = 25°C
Derate above 25°C
IF
IF(pk)
VR
PD
60
mA
1
A
6
Volts
120
mW
1.41
mW/°C
OUTPUT TRANSISTOR
Collector–Emitter Voltage
Emitter–Collector Voltage
Collector Current — Continuous
Detector Power Dissipation @ TA = 25°C
Derate above 25°C
VCEO
VECO
IC
PD
30
Volts
7
Volts
150
mA
150
mW
1.76
mW/°C
TOTAL DEVICE
Input–Output Isolation Voltage(1)
(f = 60 Hz, t = 1 sec.)
VISO
7500
Vac(pk)
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
PD
250
mW
2.94
mW/°C
Ambient Operating Temperature Range(2)
Storage Temperature Range(2)
TA
– 55 to +100
°C
Tstg – 55 to +150
°C
Lead Soldering Temperature
(1/16″ from case, 10 sec. duration)
TL
260
°C
1. Input–Output Isolation Voltage, VISO, is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4 and 5 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 1
Motorola Optoelectronics Device Data
Order this document
by MOC8101/D
MOC8101
[CTR = 50–80%]
MOC8102
[CTR = 73–117%]
MOC8103
[CTR = 108–173%]
MOC8104
[CTR = 160–256%]
MOC8105 *
[CTR = 65–133%]
*Motorola Preferred Device
STYLE 3 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
SCHEMATIC
1
NC
6
2
5
3
NC
4
PIN 1. ANODE
2. CATHODE
3. NO CONNECTION
4. EMITTER
5. COLLECTOR
6. NO CONNECTION
1