MOC8080 Datasheet, PDF (1/6 Pages) Motorola, Inc – 6-Pin DIP Optoisolators Darlington Output

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MOC8080/D
GlobalOptoisolator™
6-Pin DIP Optoisolator
Darlington Output
The MOC8080 device consists of a gallium arsenide infrared emitting diode
optically coupled to a monolithic silicon photodarlington detector. They are
designed for use in applications requiring high gain at specified input currents.
• High Output Collector Current (IC)
• Low, Stable Leakage Current at Elevated Temperature
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Applications
• Appliances, Measuring Instruments
• General Purpose Switching Circuits
• Programmable Controllers
• Portable Electronics
• Interfacing and coupling systems of different potentials and impedances
• Solid State Relays
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
INPUT LED
Reverse Voltage
Forward Current — Continuous
LED Power Dissipation @ TA = 25°C
with Negligible Power in Output Detector
Derate above 25°C
VR
6
Volts
IF
60
mA
PD
120
mW
1.41
mW/°C
OUTPUT DETECTOR
Collector–Emitter Voltage
Emitter–Collector Voltage
Collector–Base Voltage
Collector Current — Continuous
Detector Power Dissipation @ TA = 25°C
with Negligible Power in Input LED
Derate above 25°C
VCEO
VECO
VCBO
IC
PD
55
Volts
5
Volts
55
Volts
150
mA
150
mW
1.76
mW/°C
TOTAL DEVICE
Isolation Surge Voltage(1)
(Peak ac Voltage, 60 Hz, 1 sec Duration)
VISO
7500
Vac(pk)
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
PD
250
mW
2.94
mW/°C
Ambient Operating Temperature Range(2)
Storage Temperature Range(2)
TA
– 55 to +100
°C
Tstg – 55 to +150
°C
Soldering Temperature (10 sec, 1/16″ from case)
TL
260
°C
1. Isolation surge voltage is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 1
©^MM^oot^to^or^ro^ola^l,^aIn^Oc.^p1^t9^o9^e5^{lectronics Device Data}
MOC8080
[CTR = 500% Min]
Motorola Preferred Device
STYLE 1 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
SCHEMATIC
1
6
2
5
3
4
PIN 1. LED ANODE
2. LED CATHODE
3. N.C.
4. EMITTER
5. COLLECTOR
6. BASE
1