MOC8020 Datasheet, PDF (1/6 Pages) Motorola, Inc – 6-Pin DIP Optoisolators Darlington Ouput(No Base Connection)

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MOC8020/D
GlobalOptoisolator™
6-Pin DIP Optoisolators
Darlington Output
(No Base Connection)
The MOC8020 and MOC8021 devices consist of a gallium arsenide infrared
emitting diode optically coupled to a monolithic silicon photodarlington detector.
The chip to Pin 6 base connection has been eliminated to improve the device’s
output performance in higher noise environments.
• No Base Connection for Improved Noise Immunity
• Higher Sensitivity to Low Input Drive Current
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Applications
• Appliances, Measuring Instruments
• I/O Interfaces for Computers
• Programmable Controllers
• Portable Electronics
• Interfacing and coupling systems of different potentials and impedances
• Solid State Relays
• Circuits Exposed to High Noise Environments
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
INPUT LED
Reverse Voltage
Forward Current — Continuous
LED Power Dissipation @ TA = 25°C
with Negligible Power in Output Detector
Derate above 25°C
OUTPUT DETECTOR
Collector–Emitter Voltage
Collector Current Continuous
Emitter–Collector Voltage
Detector Power Dissipation @ TA = 25°C
with Negligible Power in Input LED
Derate above 25°C
TOTAL DEVICE
Isolation Surge Voltage(1)
(Peak ac Voltage, 60 Hz, 1 sec Duration)
VR
IF
PD
VCEO
IC
VECO
PD
VISO
3
Volts
60
mA
120
mW
1.41
mW/°C
50
Volts
150
mA
5
Volts
150
mW
1.76
mW/°C
7500
Vac(pk)
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
PD
250
mW
2.94
mW/°C
Ambient Operating Temperature Range(2)
Storage Temperature Range(2)
TA
– 55 to +100
°C
Tstg – 55 to +150
°C
Soldering Temperature (10 sec, 1/16″ from case)
TL
260
°C
1. Isolation surge voltage is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4 and 5 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 1
©^MM^oot^to^or^ro^ola^l,^aIn^Oc.^p1^t9^o9^e5^{lectronics Device Data}
MOC8020
[CTR = 500% Min]
MOC8021
[CTR = 1000% Min]
STYLE 3 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
SCHEMATIC
1
6
2
5
3
4
PIN 1. LED ANODE
2. LED CATHODE
3. N.C.
4. EMITTER
5. COLLECTOR
6. N.C.
1