MOC3081 Datasheet, PDF (1/6 Pages) Motorola, Inc – 6-Pin DIP Zero-Cross Optoisolators Triac Driver Output

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
GlobalOptoisolator™
6-Pin DIP Zero-Cross
Optoisolators Triac Driver Output
(800 Volts Peak)
The MOC3081, MOC3082 and MOC3083 devices consist of gallium arsenide
infrared emitting diodes optically coupled to monolithic silicon detectors
performing the function of Zero Voltage Crossing bilateral triac drivers.
They are designed for use with a triac in the interface of logic systems to
equipment powered from 240 Vac lines, such as solid–state relays, industrial
controls, motors, solenoids and consumer appliances, etc.
• Simplifies Logic Control of 240 Vac Power
• Zero Voltage Crossing
• dv/dt of 1500 V/µs Typical, 600 V/µs Guaranteed
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Recommended for 240 Vac(rms) Applications:
• Solenoid/Valve Controls
• Temperature Controls
• Lighting Controls
• E.M. Contactors
• Static Power Switches
• AC Motor Starters
• AC Motor Drives
• Solid State Relays
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
INPUT LED
Reverse Voltage
Forward Current — Continuous
Total Power Dissipation @ TA = 25°C
Negligible Power in Output Driver
Derate above 25°C
VR
6
Volts
IF
60
mA
PD
120
mW
1.41
mW/°C
OUTPUT DRIVER
Off–State Output Terminal Voltage
Peak Repetitive Surge Current
(PW = 100 µs, 120 pps)
Total Power Dissipation @ TA = 25°C
Derate above 25°C
VDRM
ITSM
PD
800
Volts
1
A
150
mW
1.76
mW/°C
TOTAL DEVICE
Isolation Surge Voltage(1)
(Peak ac Voltage, 60 Hz, 1 Second Duration)
VISO
7500
Vac(pk)
Total Power Dissipation @ TA = 25°C
Derate above 25°C
PD
250
mW
2.94
mW/°C
Junction Temperature Range
Ambient Operating Temperature Range(2)
Storage Temperature Range(2)
TJ
– 40 to +100
°C
TA
– 40 to +85
°C
Tstg – 40 to +150
°C
Soldering Temperature (10 s)
TL
260
°C
1. Isolation surge voltage, VISO, is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 1
©^MM^oot^to^or^ro^ola^l,^aIn^Oc.^p1^t9^o9^e5^{lectronics Device Data}
Order this document
by MOC3081/D
MOC3081
[IFT = 15 mA Max]
MOC3082
[IFT = 10 mA Max]
MOC3083*
[IFT = 5 mA Max]
*Motorola Preferred Device
STYLE 6 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
COUPLER SCHEMATIC
1
6
2
5
ZERO
3 CROSSING
4
CIRCUIT
1. ANODE
2. CATHODE
3. NC
4. MAIN TERMINAL
5. SUBSTRATE
DO NOT CONNECT
6. MAIN TERMINAL
1