MOC3051 Datasheet, PDF (1/8 Pages) Motorola, Inc – 6-Pin DIP Random-Phase Optoisolators Triac Drivers

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
GlobalOptoisolator™
6-Pin DIP Random-Phase
Optoisolators Triac Drivers
(600 Volts Peak)
The MOC3051 Series consists of a GaAs infrared LED optically coupled to a
non–Zero–crossing silicon bilateral AC switch (triac). The MOC3051 Series
isolates low voltage logic from 115 and 240 Vac lines to provide random phase
control of high current triacs or thyristors. The MOC3051 Series features greatly
enhanced static dv/dt capability to ensure stable switching performance of
inductive loads.
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Recommended for 115/240 Vac(rms) Applications:
• Solenoid/Valve Controls
• Lamp Ballasts
• Static AC Power Switch
• Interfacing Microprocessors to 115 and 240 Vac
Peripherals
• Solid State Relays
• Incandescent Lamp Dimmers
• Temperature Controls
• Motor Controls
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
INFRARED EMITTING DIODE
Reverse Voltage
Forward Current — Continuous
Total Power Dissipation @ TA = 25°C
Negligible Power in Triac Driver
Derate above 25°C
VR
3
Volts
IF
60
mA
PD
100
mW
1.33
mW/°C
OUTPUT DRIVER
Off–State Output Terminal Voltage
Peak Repetitive Surge Current
(PW = 100 µs, 120 pps)
VDRM
600
ITSM
1
Volts
A
Total Power Dissipation @ TA = 25°C
Derate above 25°C
PD
300
mW
4
mW/°C
TOTAL DEVICE
Isolation Surge Voltage (1)
(Peak ac Voltage, 60 Hz, 1 Second Duration)
VISO
7500
Vac(pk)
Total Power Dissipation @ TA = 25°C
Derate above 25°C
PD
330
mW
4.4
mW/°C
Junction Temperature Range
TJ
– 40 to +100
°C
Ambient Operating Temperature Range (2)
Storage Temperature Range(2)
TA
– 40 to +85
°C
Tstg – 40 to +150
°C
Soldering Temperature (10 s)
TL
260
°C
1. Isolation surge voltage, VISO, is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
(Replaces MOC3050/D)
©^MM^oot^to^or^ro^ola^l,^aIn^Oc.^p1^t9^o9^e5^{lectronics Device Data}
Order this document
by MOC3051/D
MOC3051
[IFT = 15 mA Max]
MOC3052*
[IFT = 10 mA Max]
*Motorola Preferred Device
STYLE 6 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
COUPLER SCHEMATIC
1
6
2
5
3
4
1. ANODE
2. CATHODE
3. NC
4. MAIN TERMINAL
5. SUBSTRATE
DO NOT CONNECT
6. MAIN TERMINAL
1