MOC119 Datasheet, PDF (1/6 Pages) Motorola, Inc – 6-Pin DIP Optoisolator Darlington Output(No Base Connection)

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MOC119/D
GlobalOptoisolator™
6-Pin DIP Optoisolator
Darlington Output
(No Base Connection)
The MOC119 device consists of a gallium arsenide infrared emitting diode optically
coupled to a monolithic silicon photodarlington detector. The chip to Pin 6 connection
has been eliminated for better performance when used in high noise environments.
It is designed for use in applications requiring high improved noise immunity.
• Provides Higher Output Collector Current (IC) with Lower Values of Input Drive Current (IF)
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Applications
• Appliance, Measuring Instruments
• Interfacing and coupling systems of different potentials and impedances
• Monitor and Detection Circuits
• I/O Interfaces for Computers
• Solid State Relays
• Portable Electronics
• Programmable Controllers
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
INPUT LED
Reverse Voltage
Forward Current — Continuous
LED Power Dissipation @ TA = 25°C
with Negligible Power in Output Detector
Derate above 25°C
VR
3
Volts
IF
60
mA
PD
120
mW
1.41
mW/°C
OUTPUT DETECTOR
Collector–Emitter Voltage
Emitter–Collector Voltage
Detector Power Dissipation @ TA = 25°C
with Negligible Power in Input LED
Derate above 25°C
VCEO
VECO
PD
30
Volts
7
Volts
150
mW
1.76
mW/°C
TOTAL DEVICE
Isolation Surge Voltage(1)
(Peak ac Voltage, 60 Hz, 1 sec Duration)
VISO
7500
Vac(pk)
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
PD
250
mW
2.94
mW/°C
Ambient Operating Temperature Range(2)
Storage Temperature Range(2)
TA
– 55 to +100
°C
Tstg – 55 to +150
°C
Soldering Temperature (10 sec, 1/16″ from case)
TL
260
°C
1. Isolation surge voltage is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4 and 5 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 2
©^MM^oot^to^or^ro^ola^l,^aIn^Oc.^p1^t9^o9^e5^{lectronics Device Data}
MOC119
[CTR = 300% Min]
STYLE 3 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
SCHEMATIC
1
6
2
5
3
4
PIN 1. LED ANODE
2. LED CATHODE
3. N.C.
4. EMITTER
5. COLLECTOR
6. N.C.
1