MKP3V110 Datasheet, PDF (1/4 Pages) Motorola, Inc – SIDACs 1 AMPERE RMS 100 thru 135 VOLTS

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Sidac High Voltage
Bilateral Triggers
. . . designed for direct interface with the ac power line. Upon reaching the breakover
voltage in each direction, the device switches from a blocking state to a low voltage
on-state. Conduction will continue like an SCR until the main terminal current drops
below the holding current. The plastic axial lead package provides high pulse current
capability at low cost. Glass passivation insures reliable operation. Applications are:
• High Pressure Sodium Vapor Lighting
• Strobes and Flashers
• Ignitors
• High Voltage Regulators
• Pulse Generators
Order this document
by MKP3V110/D
MKP3V110*
MKP3V120*
MKP3V130*
*Motorola preferred devices
SIDACs
1 AMPERE RMS
100 thru 135 VOLTS
MT1
MT2
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Repetitive Breakover Voltage
MKP3V110
MKP3V120
MKP3V130
Off-State Repetitive Voltage
On-State RMS Current
On-State Surge Current (Non-repetitive)
(60 Hz One Cycle Sine Wave, Peak Value)
Operating Junction Temperature Range
Storage Temperature Range
Lead Solder Temperature
(Lead Length ≥ 1/16″ from Case, 10 s Max)
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance, Junction to Lead
(Lead Length = 3/8″)
CASE 267-03
SURMETIC 50
PLASTIC AXIAL
Symbol
Min
V(BO)
100
110
120
VDRM
—
IT(RMS)
—
ITSM
—
TJ
–40
Tstg
–40
—
—
Max
120
130
140
± 90
1
20
+125
+150
+230
Unit
Volts
Volts
Amp
Amps
°C
°C
°C
Symbol
Min
R_θJL
—
Max
Unit
15
°C/W
Preferred devices are Motorola recommended choices for future use and best overall value.
Motorola Thyristor Device Data
1
© Motorola, Inc. 1995