MKP1V120 Datasheet, PDF (1/4 Pages) Motorola, Inc – SIDACs 0.9 AMPERES RMS 110 thru 280 VOLTS

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Sidac High Voltage
Bilateral Triggers
. . . designed for direct interface with the ac power line. Upon reaching the breakover
voltage in each direction, the device switches from a blocking state to a low voltage
on-state. Conduction will continue like an SCR until the main terminal current drops
below the holding current. The plastic axial lead package provides high pulse current
capability at low cost. Glass passivation insures reliable operation. Applications are:
• High Pressure Sodium Vapor Lighting
• Strobes and Flashers
• Ignitors
• High Voltage Regulators
• Pulse Generators
Order this document
by MKP1V120/D
MKP1V120
MKP1V130
SIDACs
0.9 AMPERES RMS
110 thru 280 VOLTS
MT1
MT2
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Off-State Repetitive Voltage
On-State Current RMS (TL = 80°C, Lead Length = 3/8″,
conduction angle = 180°, 60 Hz Sine Wave)
On-State Surge Current (Non-repetitive)
(60 Hz One Cycle Sine Wave, Peak Value)
Operating Junction Temperature Range
Storage Temperature Range
Lead Solder Temperature
(Lead Length ≥ 1/16″ from Case, 10 s Max)
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance, Junction to Lead
Lead Length = 3/8″
Symbol
VDRM
IT(RMS)
ITSM
TJ
Tstg
TL
Symbol
R_θJL
CASE 59-04
(DO-41)
Polarity denoted by cathode band
MKP1V120
MKP1V130
±90
0.9
4
–40 to +125
–40 to +150
230
Max
40
Unit
Volts
Amp
Amps
°C
°C
°C
Unit
°C/W
REV 1
Motorola Thyristor Device Data
1
© Motorola, Inc. 1995