MJE13007 Datasheet, PDF (1/10 Pages) Motorola, Inc – POWER TRANSISTOR 8.0 AMPERES 400 VOLTS 80/40 WATTS

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MJE13007/D
Designer's Data Sheet
SWITCHMODE™
NPN Bipolar Power Transistor
For Switching Power Supply Applications
The MJE/MJF13007 is designed for high–voltage, high–speed power switching
inductive circuits where fall time is critical. It is particularly suited for 115 and 220 V
switchmode applications such as Switching Regulators, Inverters, Motor Controls,
Solenoid/Relay drivers and Deflection circuits.
• VCEO(sus) 400 V
• Reverse Bias SOA with Inductive Loads @ TC = 100°C
• 700 V Blocking Capability
• SOA and Switching Applications Information
• Two Package Choices: Standard TO–220 or Isolated TO–220
• MJF13007 is UL Recognized to 3500 VRMS, File #E69369
MJE13007
MJF13007
POWER TRANSISTOR
8.0 AMPERES
400 VOLTS
80/40 WATTS
MAXIMUM RATINGS
Rating
Symbol MJE13007 MJF13007 Unit
Collector–Emitter Sustaining Voltage
Collector–Emitter Breakdown Voltage
Emitter–Base Voltage
Collector Current — Continuous
Collector Current — Peak (1)
Base Current — Continuous
Base Current — Peak (1)
Emitter Current — Continuous
Emitter Current — Peak (1)
RMS Isolation Voltage
(for 1 sec, R.H. < 30%, TA = 25°C)
Test No. 1 Per Fig. 15
Test No. 2 Per Fig. 16
Test No. 3 Per Fig. 17
Proper strike and creepage distance must
be provided
VCEO
VCES
VEBO
IC
ICM
IB
IBM
IE
IEM
VISOL
400
Vdc
700
Vdc
9.0
Vdc
8.0
Adc
16
4.0
Adc
8.0
12
Adc
24
V
—
4500
—
3500
—
1500
Total Device Dissipation @ TC = 25°C
Derate above 25°C
PD
80
40*
Watts
0.64
0.32
W/°C
Operating and Storage Temperature
TJ, Tstg
– 65 to 150
°C
THERMAL CHARACTERISTICS
Thermal Resistance
— Junction to Case
— Junction to Ambient
R_θJC
R_θJA
°1.56°
°62.5°
°3.12°
°62.5°
°C/W
Maximum Lead Temperature for Soldering
TL
Purposes: 1/8″ from Case for 5 Seconds
260
°C
(1) Pulse Test: Pulse Width = 5.0 ms, Duty Cycle ≤ 10%.
*Measurement made with thermocouple contacting the bottom insulated mountign surface of the
*package (in a location beneath the die), the device mounted on a heatsink with thermal grease applied
*at a mounting torque of 6 to 8•lbs.
CASE 221A–06
TO–220AB
MJE13007
CASE 221D–02
ISOLATED TO–220 TYPE
UL RECOGNIZED
MJF13007
Designer’s Data for “Worst Case” Conditions — The Designer’s Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit
curves — representing boundaries on device characteristics — are given to facilitate “worst case” design.
Designer’s and SWITCHMODE are trademarks of Motorola, Inc.
©_MM_oo_toto_rr_oo_lla_a, I_Bnc_ip. 1_o9_la95_{r Power Transistor Device Data}
1