MHW607-1 Datasheet, PDF (1/6 Pages) Motorola, Inc – The RF Line VHF Power Amplifiers

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MHW607/D
The RF Line
VHF Power Amplifiers
. . . designed for 7.5 volt VHF power amplifier applications in industrial and
commercial equipment primarily hand portable radios.
• MHW607–1: 136 – 150 MHz
• MHW607–2: 146 – 174 MHz
• MHW607–3: 174 – 195 MHz
• MHW607–4: 184 – 210 MHz
• Specified 7.5 Volt Characteristics:
— RF Input Power = 1.0 mW (0 dBm)
— RF Output Power = 7.0 Watts (MHW607–1,–2); 6.5 W (MHW607–3,–4)
— Minimum Gain (VControl = 7.0 V) = 38.5 dB
— Harmonics = – 40 dBc Max @ 2.0 fo
• 50 Ω Input/Output Impedance
• Guaranteed Stability and Ruggedness
• Epoxy Glass PCB Construction Gives Consistent Performance and Reliability
• Circuit board photomaster available upon request by contacting RF Tactical
Marketing in Phoenix, AZ.
MHW607-1
MHW607-2
MHW607-3
MHW607-4
7.0 W — 136 to 210 MHz
6.5 W — 174 to 210 MHz
VHF POWER
AMPLIFIERS
MAXIMUM RATINGS (Flange Temperature = 25°C)
CASE 301K–02, STYLE 3
Rating
Symbol
Value
Unit
DC Supply Voltage (Pins 2, 4, 5)
Vs1,2,3
9.0
Vdc
DC Control Voltage (Pin 3)
VCont
9.0
Vdc
RF Input Power
Pin
5.0
mW
RF Output Power (Vs1 = Vs2 = Vs3 = 9.0 V)
Pout
10
W
Operating Case Temperature Range
TC
– 30 to +100
°C
Storage Temperature Range
Tstg
– 30 to +100
°C
W ELECTRICAL CHARACTERISTICS (Vs1 = Vs2 = Vs3 = 7.5 Vdc, (Pins 2, 4, 5), TC = 25°C, 50 System)
Characteristic
Symbol
Min
Max
Unit
Frequency Range
MHW607–1
MHW607–2
MHW607–3
MHW607–4
Control Voltage (Pout = 7.0 W, Pin = 1.0 MW)(1)
Quiescent Current (Vs1 = Vs2 = Vs3 = 7.5 Vdc, VCont = 7.0 Vdc)
Power Gain (Pout = 7.0 W, VCont = 7.0 Vdc)
Efficiency (Pout = 7.0 W, Pin = 1.0 mW)(1)
Harmonics (Pout = 7.0 W)(1) ^{2 fo}
(Pin = 1.0 mW) 3 fo
W Input VSWR (Pout = 7.0 W, Pin = 1.0 mW), 50 Ref. (1)
Load Mismatch (Vs1 = Vs2 = Vs3 = 9.0 Vdc)
VSWR = 20:1, Pout = 8 W, Pin = 5.0 mW)(1)
Stability (Pin = 1.0 – 30 mW, Vs1 = Vs2 = Vs3 = 6.0–9.0 Vdc)
Pout between 1.0 W and 10 W ⁽¹⁾
Load VSWR = 8:1
—
VCont
Is1(q) + Is2(q)
Gp
h
—
—
136
150
MHz
146
174
174
195
184
210
0
7.0
Vdc
—
160
mA
38.5
—
dB
40
—
%
—
– 40
dBc
– 45
—
2.0:1
—
No Degradation
in Power Output
All spurious outputs
more than 60 dB
below desired signal
Control Current (Vs1 = Vs2 = Vs3 = 7.5 V,
Pin = 0 dBm, VCont Set for Po = 7.0 W)
(1) Adjust VCont for specified Pout.
—
325
mA
REV 6
©MMOotoTrOolaR, OIncL.A19R94F DEVICE DATA
MHW607–1 MHW607–2 MHW607–3 MHW607–4
1