English
Language : 

MHW1134 Datasheet, PDF (1/4 Pages) Motorola, Inc – Low Distortion Wideband Amplifiers
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
The RF Line
Low Distortion
Wideband Amplifiers
. . . designed specifically for broadband applications requiring low distortion
characteristics. Specified for use as return amplifiers for mid–split and high–split
2–way cable TV systems. Features all gold metallization system.
• Guaranteed Broadband Power Gain @ f = 5.0– 200 MHz
• Guaranteed Broadband Noise Figure @ f = 5.0– 175 MHz
• Superior Gain, Return Loss and DC Current Stability with Temperature
• All Gold Metallization
• All Ion–Implanted Arsenic Emitter Transistor Chips with 6.0 GHz fT’s
• Circuit Design Optimized for Good RF Stability Under High VSWR Load Conditions
• Transformers Designed to Insure Good Low Frequency Gain Stability versus
Temperature
Order this document
by MHW1134/D
MHW1134
MHW1184
MHW1224
MHW1244
13.0 dB
18.0 dB
22.0 dB
24.0 dB
5.0 – 200 MHz
CATV HIGH–SPLIT
REVERSE AMPLIFIERS
CASE 714–06, STYLE 1
ABSOLUTE MAXIMUM RATINGS
Rating
RF Voltage Input (Single Tone)
DC Supply Voltage
Operating Case Temperature Range
Storage Temperature Range
Symbol
Vin
VCC
TC
Tstg
Value
+ 65
+ 28
– 20 to +100
– 40 to +100
Unit
dBmV
Vdc
°C
°C
ELECTRICAL CHARACTERISTICS W (VCC = 24 Vdc, TC = + 30°C, 75 system)
Characteristic
Symbol MHW1134 MHW1184
MHW1224
MHW1244
Units
Power Gain @ 10 MHz
GP
13.0 ± 0.5 18.5 ± 0.5 22.0 ± 0.5 24.0 ± 0.5
dB
Frequency Range (Response/Return Loss) Note 1
BW
5.0–200
MHz
Cable Slope Equivalent (5.0– 200 MHz)
S
– 0.2 Min/+ 0.8 Max
dB
Gain Flatness (5.0 – 200 MHz)
F
± 0.2 Max
dB
Input/Output Return Loss (5.0– 200 MHz) Note 1
IRL/ORL
18.0 Min
dB
Cross Modulation Distortion @ +50 dBmV per ch.
12–Channel FLAT (5.0 – 120 MHz)
22–Channel FLAT (5.0 – 175 MHz) (2) (3)
26–Channel FLAT (5.0 – 200 MHz)
XM12
XM22
XM26
– 70 Typ
– 68 Typ
– 67 Typ
– 66 Typ
dB
– 65 Max – 64 Max – 62 Max – 61 Max
dB
– 65 Typ
– 64 Typ
– 62 Typ
– 61 Typ
dB
NOTES:
1. Response and return loss characteristics are tested and guaranteed for the full 5.0 – 200 MHz frequency range.
2. Motorola100% distortion and noise figure testing is performed over the 5.0 – 175 MHz frequency range. Cross modulation and composite triple
beat testing are with 22–channel loading; Video carriers used are:
T7 – T13
7.0 – 43.0 MHz
7–Channels
2–6
55.25 – 83.25 MHz 5–Channels
A–7
121.25 – 175.25 MHz 10–Channels
3. Video carriers used for 12–Channel typical performances are T7 – 6; For 26–Channel typical performance, Channels 8, 9, 10 and 11 are added
to the 22–Channel carriers listed above.
REV 6
©MMOotoTrOolaR, OIncL.A19R94F DEVICE DATA
MHW1134 MHW1184 MHW1224 MHW1244
1