|
MHPM6B20E60D3 Datasheet, PDF (1/5 Pages) Motorola, Inc – Hybrid Power Module | |||
|
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MHPM6B20E60D3/D
Product Preview
Hybrid Power Module
Integrated Power Stage
for 230 VAC Motor Drives
This module integrates a 3âphase inverter and 3âphase rectifier
in a single convenient package. It is designed for 2.0 hp motor drive
applications at frequencies up to 15 kHz. The inverter incorporates
advanced EMâSeries insulated gate bipolar transistors (IGBT)
matched with ultrafast soft (UFS) freeâwheeling diodes to give
optimum performance. The input bridge uses rugged, efficient
diodes with high surge capability. The top connector pins are
designed for easy interfacing to the userâs control board. It is
pinâcompatible with MHPM6B15E60D3 series modules for scal-
ability.
⢠Short Circuit Rated 10 µs @ 125°C, 400 V
⢠Pin-to-Baseplate Isolation Exceeds 2500 Vac (rms)
⢠Compact Package Outline
⢠Access to Positive and Negative DC Bus
⢠GateâEmitter Clamp Diodes for ESD Protection
⢠UL Recognition Pending
Device
PHPM6B20E60D3
ORDERING INFORMATION
Voltage
Rating
Current
Rating
600
20
Equivalent
Horsepower
2.0
MHPM6B20E60D3
Motorola Preferred Device
20 AMP, 600 VOLT
HYBRID POWER MODULES
CASE 464â03
ISSUE B
MAXIMUM DEVICE RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Repetitive Peak Input Rectifier Reverse Voltage (TJ = 25°C to 150°C)
VRRM
900
IGBT Reverse Voltage
VCES
600
Gate-Emitter Voltage
VGES
± 20
Continuous IGBT Collector Current (TC = 25°C)
ICmax
20
Continuous IGBT Collector Current (TC = 80°C)
Repetitive Peak IGBT Collector Current (1)
IC80
15
IC(pk)
40
Continuous FreeâWheeling Diode Current (TC = 25°C)
IFmax
20
Continuous FreeâWheeling Diode Current (TC = 80°C)
Repetitive Peak FreeâWheeling Diode Current (1)
IF80
14
IF(pk)
40
Average Converter Output Current (PeakâtoâAverage ratio of 10, TC = 95°C)
IOmax
20
Continuous Input Rectifier Current (TC = 25°C)
NonâRepetitive Peak Input Rectifier Forward Surge Current (2)
(TJ = 95°C prior to start of surge)
IDC
20
IFSM
475
IGBT Power Dissipation per die (TC = 95°C)
PD
25
FreeâWheeling Diode Power Dissipation per die (TC = 95°C)
PD
17
Input Rectifier Power Dissipation per die (TC = 95°C)
PD
13
(1) 1.0 ms = 1.0% duty cycle
(2) 1.0 ms = 10% pulse width (tw 10%)
Preferred devices are Motorola recommended choices for future use and best overall value.
This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice.
Unit
V
V
V
A
A
A
A
A
A
A
A
A
W
W
W
©MMoottoorroollaa, IInGc.B1T998Device Data
1
|
▷ |