MGW30N60 Datasheet, PDF (1/6 Pages) Motorola, Inc – Insulated Gate Bipolar Transistor

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
™ Designer's Data Sheet
Insulated Gate Bipolar Transistor
N–Channel Enhancement–Mode Silicon Gate
This Insulated Gate Bipolar Transistor (IGBT) uses an advanced
termination scheme to provide an enhanced and reliable high
voltage–blocking capability. Short circuit rated IGBT’s are specifi-
cally suited for applications requiring a guaranteed short circuit
withstand time such as Motor Control Drives. Fast switching
characteristics result in efficient operation at high frequencies.
• Industry Standard High Power TO–247 Package with
Isolated Mounting Hole
• High Speed Eoff: 60 mJ per Amp typical at 125°C
• High Short Circuit Capability – 10 ms minimum
• Robust High Voltage Termination
• Robust RBSOA
C
Order this document
by MGW30N60/D
MGW30N60
Motorola Preferred Device
IGBT IN TO–247
30 A @ 90°C
50 A @ 25°C
600 VOLTS
SHORT CIRCUIT RATED
G
E
G
C
E
CASE 340F–03, Style 4
TO–247AE
MAXIMUM RATINGS (TC = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Collector–Emitter Voltage
Collector–Gate Voltage (RGE = 1.0 MΩ)
Gate–Emitter Voltage — Continuous
Collector Current — Continuous @ TC = 25°C
— Continuous @ TC = 90°C
— Repetitive Pulsed Current (1)
Total Power Dissipation @ TC = 25°C
Derate above 25°C
VCES
VCGR
VGE
IC25
IC90
ICM
PD
600
Vdc
600
Vdc
±20
Vdc
50
Adc
30
100
Apk
202
Watts
1.61
W/°C
Operating and Storage Junction Temperature Range
Short Circuit Withstand Time
(VCC = 360 Vdc, VGE = 15 Vdc, TJ = 25°C, RG = 20 Ω)
Thermal Resistance — Junction to Case – IGBT
— Junction to Ambient
Maximum Lead Temperature for Soldering Purposes, 1/8″ from case for 5 seconds
Mounting Torque, 6–32 or M3 screw
TJ, Tstg
– 55 to 150
°C
tsc
10
ms
R_θJC
0.62
R_θJA
45
TL
260
10 lbfSin (1.13 NSm)
°C/W
°C
(1) Pulse width is limited by maximum junction temperature.
Designer’s Data for “Worst Case” Conditions — The Designer’s Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit
curves — representing boundaries on device characteristics — are given to facilitate “worst case” design.
Preferred devices are Motorola recommended choices for future use and best overall value.
© ^MMo^oto^toro^rl^oa,^laInc^T.^M19^O95^{S Power MOSFET Transistor Device Data}
1