MCR22 Datasheet, PDF (1/6 Pages) Motorola, Inc – Silicon Controlled Rectifiers

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Silicon Controlled Rectifiers
. . . designed and tested for repetitive peak operation required for CD ignition, fuel
ignitors, flash circuits, motor controls and low-power switching applications.
• 150 Amperes for 2 µs Safe Area
• High dv/dt
• Very Low Forward “On” Voltage at High Current
• Low-Cost TO-226AA (TO-92)
Order this document
by MCR22-2/D
MCR22Ć2
thru
MCR22Ć8
SCRs
1.5 AMPERES RMS
50 thru 600 VOLTS
G
A
K
K
G
CASE 29-04
A _(TO-226AA)
STYLE 10
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.)
Rating
Symbol
Value
Unit
Peak Repetitive Forward and Reverse Blocking Voltage
(RGK = IK, TJ = 25 to 125°C)
MCR22-2
MCR22-3
MCR22-4
MCR22-6
MCR22-8
VDRM,
VRRM
50
100
200
400
600
Volts
On-State Current RMS
(All Conduction Angles)
IT(RMS)
1.5
Amps
Peak Non-repetitive Surge Current, TA = 25°C
(1/2 Cycle, Sine Wave, 60 Hz)
Circuit Fusing Considerations (t = 8.3 ms)
ITSM
15
Amps
I2t
0.9
A2s
Peak Gate Power, TA = 25°C
Average Gate Power, TA = 25°C
Peak Forward Gate Current, TA = 25°C
(300 µs, 120 PPS)
PGM
0.5
PG(AV)
0.1
IFGM
0.2
Watt
Watt
Amp
Peak Reverse Gate Voltage
Operating Junction Temperature Range @ Rated VRRM and VDRM
Storage Temperature Range
q Lead Solder Temperature
(Lead Length 1/16I from case, 10 s Max)
VRGM
TJ
Tstg
—
5
–40 to +125
–40 to +150
+230
Volts
°C
°C
°C
1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate
voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current
source such that the voltage ratings of the devices are exceeded.
Motorola Thyristor Device Data
1
© Motorola, Inc. 1995