English
Language : 

MCR218FP Datasheet, PDF (1/6 Pages) Motorola, Inc – Silicon Controlled Rectifiers
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Silicon Controlled Rectifiers
Reverse Blocking Thyristors
. . . designed primarily for half-wave ac control applications, such as motor controls,
heating controls and power supply crowbar circuits.
• Glass Passivated Junctions with Center Gate Fire for Greater Parameter Uniformity
and Stability
• Small, Rugged, Thermowatt Constructed for Low Thermal Resistance, High Heat
Dissipation and Durability
• Blocking Voltage to 800 Volts
• 80 A Surge Current Capability
• Insulated Package Simplifies Mounting
Order this document
by MCR218FP/D
MCR218FP
Series
ISOLATED SCRs
8 AMPERES RMS
50 thru 800 VOLTS
G
A
K
CASE 221C-02
STYLE 2
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.)
Rating
Symbol
Value
Unit
Peak Repetitive Forward and Reverse Blocking Voltage(1)
(TJ = –40 to +125°C, Gate Open)
MCR218-2FP
MCR218-4FP
MCR218-6FP
MCR218-8FP
MCR218-10FP
VDRM
VRRM
50
200
400
600
800
Volts
On-State RMS Current (TC = +70°C) Full Cycle Sine Wave 50 to 60 Hz(2)
Peak Nonrepetitive Surge Current (One Full Cycle, 60 Hz, TC = +70°C)
Preceded and followed by rated current
IT(RMS)
8
ITSM
80
Amps
Amps
Circuit Fusing (t = 8.3 ms)
I2t
26
A2s
Peak Gate Power (TC = +70°C, Pulse Width = 10 µs)
PGM
5
Watts
Average Gate Power (TC = +70°C, t = 8.3 ms)
PG(AV)
0.5
Watt
Peak Gate Current (TC = +70°C, Pulse Width = 10 µs)
p RMS Isolation Voltage (TA = 25°C, Relative Humidity 20%)
IGM
V(ISO)
2
1500
Amps
Volts
Operating Junction Temperature
TJ
–40 to +125
°C
Storage Temperature Range
Tstg
–40 to +125
°C
1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate
voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current
source such that the voltage ratings of the devices are exceeded.
2. The case temperature reference point for all TC measurements is a point on the center lead of the package as close as possible to the plastic body.
Motorola Thyristor Device Data
1
© Motorola, Inc. 1995