MCR106 Datasheet, PDF (1/4 Pages) Motorola, Inc – Silicon Controlled Rectifiers

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Silicon Controlled Rectifiers
Reverse Blocking Triode Thyristors
PNPN devices designed for high volume consumer applications such as
temperature, light and speed control; process and remote control, and warning
systems where reliability of operation is important.
• Glass-Passivated Surface for Reliability and Uniformity
• Power Rated at Economical Prices
• Practical Level Triggering and Holding Characteristics
• Flat, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat
Dissipation and Durability
Order this document
by MCR106/D
MCR106
Series*
*Motorola preferred devices
except MCR106–3
SCRs
4 AMPERES RMS
60 thru 600 VOLTS
G
A
K
A
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.)
Rating
Peak Repetitive Forward and Reverse Blocking Voltage(1)
(TJ = 110°C, RGK = 1 kΩ)
MCR106-2
MCR106-3
MCR106-4
MCR106-6
MCR106-8
G
A
K
CASE 77-08
(TO-225AA)
STYLE 2
Symbol
VDRM
and
VRRM
Value
60
100
200
400
600
Unit
Volts
RMS Forward Current
(All Conduction Angles)
IT(RMS)
4
Amps
Average Forward Current
TC
TA
=
=
93°C
30°C
or
Peak Non-repetitive Surge Current
(1/2 Cycle, 60 Hz, TJ = –40 to +110°C)
Circuit Fusing Considerations
(t = 8.3 ms)
IT(AV)
2.55
Amps
ITSM
25
Amps
I2t
2.6
A2s
Peak Gate Power
PGM
0.5
Average Gate Power
PG(AV)
0.1
Peak Forward Gate Current
IGM
0.2
Peak Reverse Gate Voltage
VRGM
6
Operating Junction Temperature Range
TJ
–40 to +110
1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage;
however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages
shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
Watt
Watt
Amp
Volts
°C
(cont.)
Preferred devices are Motorola recommended choices for future use and best overall value.
Motorola Thyristor Device Data
1
© Motorola, Inc. 1995