MCM72F10 Datasheet, PDF (1/11 Pages) Motorola, Inc – 8MB Synchronous Fast Static RAM Module

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
8MB Synchronous Fast Static
RAM Module
The MCM72F10 (2MB) is configured as 1M x 72 bits. It is packaged in a
168–pin dual–in–line memory module DIMM. The module uses Motorola’s 3.3 V,
256K x 18 bit flow–through BurstRAMs.
Address (A), data inputs (DQ, DP), and all control signals except output enable
(G) are clock (K) controlled through positive–edge–triggered noninverting
registers.
Write cycles are internally self–timed and initiated by the rising edge of the
clock (K) input. This feature provides increased timing flexibility for incoming
signals. Synchronous byte write (W) allows writes to either individual bytes or to
both bytes.
• Single 3.3 V + 10%, – 5% Power Supply
• Plug and Pin Compatibility with 1MB, 2MB, and 4MB
• Multiple Clock Pins for Reduced Loading
• All Inputs and Outputs are LVTTL Compatible
• Byte Write Capability
• Fast SRAM Access Times: 8/9/12 ns
• High Quality Multi–Layer FR4 PWB With Separate Power and Ground
Planes
• Amp Connector, Part Number: 390064–4
• 168–Pin DIMM Module
Order this document
by MCM72F10/D
MCM72F10
168–LEAD DIMM
CASE TBD
TOP VIEW
1
11
40
41
84
REV 1
11/26/97
M^© O^MoT^toO^roR^la,O^InL^c.A¹⁹F⁹⁷AST SRAM
MCM72F10
1