MCM20027 Datasheet, PDF (1/73 Pages) Motorola, Inc – Color SXGA Digital Image Sensor 1280 x 1024 pixel progressive scan solid state image sensor

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
ImageMOS
Order this document by MCM20027/D
Advance Information
Color SXGA Digital Image Sensor
1280 x 1024 pixel progressive scan solid state image sen-
sor with integrated CDS/PGA/ADC, digital programming,
control, timing, and pixel correction features
MCM20027
1.3 Megapixel
Features:
• SXGA resolution, active CMOS image sensor with square
pixel unit cells
• 6.0µm pitch pixels with patented pinned photodiode
architecture
• Bayer-RGB color filter array with optional micro lenses
• High sensitivity, quantum efficiency, and charge
conversion efficiency
• Low fixed pattern noise / Wide dynamic range
• Antiblooming and continuous variable speed shutter
Part Number
• Single master clock operation
• Digitally programmable via I²C interface
MCM20027IBBL
• Integrated on-chip timing/logic circuitry
• CDS sample and hold for suppression of low frequency _MCM20027IBMN
and correlated reset noise
• 20X programmable variable gain to optimize dynamic
range and facilitate white balance and iris adjustment
• 10-bit, pipelined algorithmic RSD ADC (DNL +0.5 LSB, INL
+1.0 LSB)
• Automatic column offset correction for noise suppression
• Pixel addressability to support ‘Window of Interest’
windowing, resolution, and subsampling
• Encoded data stream
• 10 fps full SXGA at 13.5MHz Master Clock Rate
• Single 3.3V power supply
• 48 pin CLCC package
Description
Package
Color RGB sensor 48 Pin CLCC
with Lenslets
Monochrome
sensor without
Lenslets
48 Pin CLCC
The MCM20027 is a fully integrated, high performance CMOS image sensor with features such as integrated timing,
control, and analog signal processing for digital imaging applications. The part provides designers a complete im-
aging solution with a monolithic image capture and processing engine thus making it a true “camera on a chip”. Sys-
tem benefits enable design of smaller, portable, low cost and low power systems. Thereby making the product
suitable for a variety of consumer applications including still/full motion imaging, security/surveillance, and automo-
tive among others.
The imaging pixels are based on active CMOS pixels using pinned photodiodes that are realized using Motorola’s
sub-micron ImageMOS^TM technology. A maximum frame rate of 10 FPS at full resolution can be achieved, further
the frame rate is completely adjustable without adjusting the system clock. Each pixel on the sensor is individually
addressable allowing the user to control “Window of Interest” (WOI) panning and zooming. Control of sub-sam-
pling, resolution, exposure, gain, and other image processing features is accomplished via a two pin I²C interface.
The sensor is run by supplying a single Master Clock. The sensor output is 10 digital bits providing wide dynamic
range images.
out notice.
ELECTRO STATIC DISCHARGE WARNING:
This device is sensitive to electrostatic discharge (ESD).ESD immunity meets Human Body Model (HBM) < 1500 V and Machine Model (MM) < 150
V Additional ESD data upon request. When handling this part, proper ESD precautions should be followed to avoid exposing the device to dis-
charges which may be detrimental to its immediate performance and/or reduce the parts expected lifetime..
This document contains information on a new product.Specifications and information herein are subject to change with-
© MOTOROLA, INC. 2001
Revision 8.0 - 28 November 2001 :
MCM20027
1