MC14502B Datasheet, PDF (1/6 Pages) Motorola, Inc – Strobed Hex Inverter/Buffer

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Strobed Hex Inverter/Buffer
The MC14502B is a strobed hex buffer/inverter with 3–state outputs, an
inhibit control, and guaranteed TTL drive over the temperature range. The
3–state output simplifies design by allowing a common bus.
• Separate Output Disable Control
• 3–State Output
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ • Supply Voltage Range = 3.0 Vdc to 18 Vdc
• Capable of Driving 4LSTTL Loads Over the Rated Temperature Range
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{MAXIMUM RATINGS* (Voltages Referenced to VSS)}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _Symbol
Parameter
Value
Unit
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{VDD DC Supply Voltage}
– 0.5 to + 18.0
V
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Vin, Vout Input or Output Voltage (DC or Transient) – 0.5 to VDD + 0.5 V}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _Iin
Input Current (DC or Transient), per Pin
± 10
mA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Iout Output Current (DC or Transient), per Pin}
+ 30
mA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{PD Power Dissipation, per Packageâ€} 
500
mW
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Tstg Storage Temperature}
– 65 to + 150
_C
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _TL
Lead Temperature (8–Second Soldering)
260
_C
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{* Maximum Ratings are those values beyond which damage to the device may occur.}
†Temperature Derating:
Plastic “P and D/DW” Packages: – 7.0 mW/_C From 65_C To 125_C
Ceramic “L” Packages: – 12 mW/_C From 100_C To 125_C
CIRCUIT DIAGRAM
DISABLE
VDD
INHIBIT
D1
Q1
Other five buffers are identical
VSS
TRUTH TABLE
Dn
Inhibit Disable
0
0
0
1
0
0
X
1
0
X
X
1
X = Don’t Care
REV 3
1/94
©_MM_Cot₁or₄o₅la₀, I₂n_Bc. 1995
320
Qn
1
0
0
High
Impedance
MC14502B
L SUFFIX
CERAMIC
CASE 620
P SUFFIX
PLASTIC
CASE 648
DW SUFFIX
SOIC
CASE 751G
ORDERING INFORMATION
MC14XXXBCP
MC14XXXBCL
MC14XXXBDW
Plastic
Ceramic
SOIC
TA = – 55° to 125°C for all packages.
LOGIC DIAGRAM
3–STATE
OUTPUT
DISABLE ⁴
INHIBIT 12
D1 3
D2 6
D3 1
D4 10
D5 13
D6 15
VDD = PIN 16
VSS = PIN 8
5 Q1
7 Q2
2 Q3
9 Q4
11 Q5
14 Q6
MOTOROLA CMOS LOGIC DATA