MC12009 Datasheet, PDF (1/15 Pages) Motorola, Inc – Dual Modulus Prescaler

Dual Modulus Prescaler
These devices are two–modulus prescalers which will divide by 5 and
6, 8 and 9, and 10 and 11, respectively. A MECL–to–MTTL translator is
provided to interface directly with the MC12014 Counter Control Logic. In
addition, there is a buffered clock input and MECL bias voltage source.
B B • MC12009 480 MHz ( 5/6), MC12011 550 MHz ( 8/9), MC12013
B 550 MHz ( 10/11)
• MECL to MTTL Translator on Chip
• MECL and MTTL Enable Inputs
• 5.0 or –5.2 V Operation*
• Buffered Clock Input — Series Input RC Typ, 20 Ohms and 4 pF
• VBB Reference Voltage
• 310 Milliwatts (Typ)
* When using a 5.0 V supply, apply 5.0 V to Pin 1 (VCCO), Pin 6
(MTTL VCC), Pin 16 (VCC), and ground Pin 8 (VEE). When using
–5.2 V supply, ground Pin 1 (VCCO), Pin 6 (MTTL VCC), and
Pin 16 (VCC) and apply –5.2 V to Pin 8 (VEE). If the translator is not
required, Pin 6 may be left open to conserve dc power drain.
Order this document by MC12009/D
MC12009
MC12011
MC12013
MECL PLL COMPONENTS
DUAL MODULUS PRESCALER
SEMICONDUCTOR
TECHNICAL DATA
16
1
P SUFFIX
PLASTIC PACKAGE
CASE 648
MAXIMUM RATINGS
Characteristic
Symbol
Rating
Unit
(Ratings above which device life may be impaired)
Power Supply Voltage
(VCC = 0)
VEE
–8.0
Vdc
Input Voltage
(VCC = 0)
Vin
0 to VEE
Vdc
Output Source Current
Continuous
Surge
IO
t 50
t 100
mAdc
Storage Temperature Range
Tstg
–65 to +175
°C
(Recommended Maximum Ratings above which performance may be
degraded)
Operating Temperature Range
TA
–30 to +85
°C
MC12009, MC12011, MC12013
DC Fan–Out (Note 1)
(Gates and Flip–Flops)
n
70
—
NOTES: 1. AC fan–out is limited by desired system performance.
2. ESD data available upon request.
PIN CONNECTIONS
VCCO 1
Q2
Q3
(–) 4
(+) 5
MTTL VCC 6
MTTL Output 7
VEE 8
16 VCC
15 Clock
14 VBB
13 E1 MECL
12 ^{E2 MECL}
11 ^{E3 MECL}
10 E4 MECL
9 E5 MECL
(Top View)
ORDERING INFORMATION
Device
Operating
Temperature Range
Package
MC12009P
MC12011P TA = – 35° to +85°C
MC12013P
Plastic
© Motorola, Inc. 1997
Rev 2