MC10EL16 Datasheet, PDF (1/3 Pages) ON Semiconductor – Differential Receiver

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Differential Receiver
The MC10EL/100EL16 is a differential receiver. The device is
functionally equivalent to the E116 device with higher performance
capabilities. With output transition times significantly faster than the E116
the EL16 is ideally suited for interfacing with high frequency sources.
The EL16 provides a VBB output for either single-ended use or as a DC
bias for AC coupling to the device. The VBB pin should be used only as a
bias for the EL16 as its current sink/source capability is limited. Whenever
used, the VBB pin should be bypassed to ground via a 0.01µf capacitor.
Under open input conditions (pulled to VEE) internal input clamps will
force the Q output LOW.
• 250ps Propagation Delay
• High Bandwidth Output Transitions
• 75kΩ Internal Input Pulldown Resistors
• >1000V ESD Protection
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
NC 1
D2
D3
VBB 4
8 VCC
7Q
6Q
5 VEE
MC10EL16
MC100EL16
8
1
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751-05
PIN DESCRIPTION
PIN
D
Q
VBB
FUNCTION
Data Inputs
Data Outputs
Ref. Voltage Output
12/93
© Motorola, Inc. 1996
3–1
REV 2