|
MBR0530T1 Datasheet, PDF (1/4 Pages) Motorola, Inc – SCHOTTKY BARRIER RECTIFIER 0.5 AMPERES 30 VOLTS | |||
|
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MBR0530T1/D
Surface Mount
Schottky Power Rectifier
Plastic SODâ123 Package
MBR0530T1
MBR0530T3
Motorola Preferred Devices
. . . using the Schottky Barrier principle with a large area metalâtoâsilicon power
diode. Ideally suited for low voltage, high frequency rectification or as free
wheeling and polarity protection diodes in surface mount applications where
compact size and weight are critical to the system. This package also provides
an easy to work with alternative to leadless 34 package style. These
stateâofâtheâart devices have the following features:
SCHOTTKY BARRIER
RECTIFIER
0.5 AMPERES
30 VOLTS
⢠Guardring for Stress Protection
⢠Low Forward Voltage
⢠125°C Operating Junction Temperature
⢠Epoxy Meets UL94, VO at 1/8â³
⢠Package Designed for Optimal Automated Board Assembly
Mechanical Characteristics
⢠Reel Options: MBR0530T1 = 3,000 per 7Ⳡreel/8 mm tape
Reel Options: MBR0530T3 = 10,000 per 13â³ reel/8 mm tape
⢠Device Marking: B3
⢠Polarity Designator: Cathode Band
⢠Weight: 11.7 mg (approximately)
⢠Case: Epoxy, Molded
⢠Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
⢠Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
CASE 425â04
SODâ123
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current (Rated VR) TL = 100°C
Nonârepetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
VRRM
VRWM
VR
IF(AV)
IFSM
Storage Temperature
Operating Junction Temperature
Voltage Rate of Change (Rated VR)
THERMAL CHARACTERISTICS
Tstg
TJ
dv/dt
Thermal Resistance â Junction to Ambient (1)
Thermal Resistance â Junction to Lead (1)
ELECTRICAL CHARACTERISTICS
RθJA
RθJL
Maximum Instantaneous Forward Voltage (2)
VF
(iF = 0.1 Amps, TJ = 25°C)
(iF = 0.5 Amps, TJ = 25°C)
Maximum Instantaneous Reverse Current (2)
IR
(Rated dc Voltage, TC = 25°C)
(VR = 15 V, TC = 25°C)
(1) FRâ4 or FRâ5 = 3.5 x 1.5 inches using the Motorola minimum recommended footprint.
(2) Pulse Test: Pulse Width = 300 µs, Duty Cycle ⤠2%.
30
0.5
5.5
â 65 to +125
â 65 to +125
1000
340
150
0.375
0.43
130
20
Volts
Amps
Amps
°C
°C
V/µs
°C/W
°C/W
Volts
µA
Preferred devices are Motorola recommended choices for future use and best overall value.
Rev 1
©RMeoctotriofilea,rInDce. 1v9ic96e Data
1
|
▷ |