H11L1 Datasheet, PDF (1/6 Pages) Motorola, Inc – 6-Pin DIP Optoisolators Logic Output

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
GlobalOptoisolator™
6-Pin DIP Optoisolators
Logic Output
The H11L1 and H11L2 have a gallium arsenide IRED optically coupled to a
high–speed integrated detector with Schmitt trigger output. Designed for
applications requiring electrical isolation, fast response time, noise immunity
and digital logic compatibility.
• Guaranteed Switching Times — ton, toff < 4 µs
• Built–In On/Off Threshold Hysteresis
• High Data Rate, 1 MHz Typical (NRZ)
• Wide Supply Voltage Capability
• Microprocessor Compatible Drive
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Applications
• Interfacing Computer Terminals to Peripheral Equipment
• Digital Control of Power Supplies
• Line Receiver — Eliminates Noise
• Digital Control of Motors and Other Servo Machine Applications
• Logic to Logic Isolator
• Logic Level Shifter — Couples TTL to CMOS
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
INPUT LED
Reverse Voltage
Forward Current — Continuous
Forward Current — Peak
Pulse Width = 300 µs, 2% Duty Cycle
VR
6
Volts
IF
60
mA
1.2
Amp
LED Power Dissipation @ TA = 25°C
Derate above 25°C
PD
120
mW
1.41
mW/°C
OUTPUT DETECTOR
Output Voltage Range
Supply Voltage Range
Output Current
Detector Power Dissipation @ TA = 25°C
Derate above 25°C
Vo
VCC
IO
PD
0 –16
3 –16
50
150
1.76
Volts
Volts
mA
mW
mW/°C
TOTAL DEVICE
Total Device Dissipation @ TA = 25°C
Derate above 25°C
PD
250
mW
2.94
mW/°C
Maximum Operating Temperature(2)
Storage Temperature Range(2)
TA
– 40 to + 85
°C
Tstg – 55 to +150
°C
Soldering Temperature (10 s)
TL
260
°C
Isolation Surge Voltage
(Pk ac Voltage, 60 Hz, 1 Second Duration)(1)
VISO
7500
Vac(pk)
1. Isolation surge voltage is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 1
©^MM^oot^to^or^ro^ola^l,^aIn^Oc.^p1^t9^o9^e5^{lectronics Device Data}
Order this document
by H11L1/D
H11L1*
[IF(on) = 1.6 mA Max]
H11L2
[IF(on) = 10 mA Max]
*Motorola Preferred Device
STYLE 5 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
SCHEMATIC
1
6
2
5
3
4
PIN 1. ANODE
2. CATHODE
3. NC
4. OPEN COLLECTOR
OUTPUT
5. GND
6. VCC
1