English
Language : 

H11D1 Datasheet, PDF (1/6 Pages) Motorola, Inc – 6-Pin DIP Optoisolators High Voltage Transistor Output(300 Volts)
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
GlobalOptoisolator™
6-Pin DIP Optoisolators
High Voltage Transistor Output
(300 Volts)
The H11D1 and H11D2 consist of gallium arsenide infrared emitting diodes
optically coupled to high voltage, silicon, phototransistor detectors in a standard
6–pin DIP package. They are designed for high voltage applications and are
particularly useful in copy machines and solid state relays.
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Applications
• Copy Machines
• Interfacing and coupling systems of different potentials and impedances
• Monitor and Detection Circuits
• Solid State Relays
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
INPUT LED
Forward Current — Continuous
Forward Current — Peak
Pulse Width = 1 µs, 330 pps
IF
60
mA
IF
1.2
Amps
LED Power Dissipation @ TA = 25°C
Derate above 25°C
PD
120
mW
1.41
mW/°C
OUTPUT TRANSISTOR
Collector–Emitter Voltage
Emitter–Collector Voltage
Collector–Base Voltage
Collector Current — Continuous
Detector Power Dissipation @ TA = 25°C
Derate above 25°C
VCER
VECO
VCBO
IC
PD
300
Volts
7
Volts
300
Volts
100
mA
150
mW
1.76
mW/°C
TOTAL DEVICE
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
PD
250
mW
2.94
mW/°C
Operating Temperature Range(3)
Storage Temperature Range(3)
TJ
– 55 to +100
°C
Tstg – 55 to +150
°C
Soldering Temperature (10 s)
TL
260
°C
Isolation Surge Voltage
Peak ac Voltage, 60 Hz, 1 Second Duration(1)
VISO
7500
Vac(pk)
1. Isolation surge voltage is an internal device dielectric breakdown rating. For this test, Pins 1 and 2
1. are common, and Pins 4, 5 and 6 are common.
2. H11D1 is rated @ 5656 Volts peak (VISO). H11D2 is rated @ 3535 Volts peak (VISO)
1. Otherwise they are identical, both parts built by Motorola are rated @ 7500 Volts peak (VISO)
3. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 1
©MMoottoorroolal,aInOc.p1t9o9e5lectronics Device Data
Order this document
by H11D1/D
H11D1*
H11D2
[CTR = 20% Min]
*Motorola Preferred Device
STYLE 1 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
SCHEMATIC
1
6
2
5
3
4
PIN 1. ANODE
2. CATHODE
3. N.C.
4. EMITTER
5. COLLECTOR
6. BASE
1