H11B1 Datasheet, PDF (1/6 Pages) Motorola, Inc – 6-Pin DIP Optoisolators Darlington Output(Low Input Current)

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by H11B1/D
GlobalOptoisolator™
6-Pin DIP Optoisolators
Darlington Output (Low Input Current)
The H11B1 and H11B3 devices consist of a gallium arsenide infrared emitting
diode optically coupled to a monolithic silicon photodarlington detector. They
are designed for use in applications requiring high output current (IC) at low LED
input currents (IF).
• High Sensitivity to Low Input Drive Current (IF = 1 mA)
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Applications
• Appliances, Measuring Instruments
• I/O Interfaces for Computers
• Programmable Controllers
• Interfacing and coupling systems of different potentials and impedances
• Solid State Relays
• Portable Electronics
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
INPUT LED
Reverse Voltage
Forward Current — Continuous
LED Power Dissipation @ TA = 25°C
with Negligible Power in Output Detector
Derate above 25°C
VR
3
Volts
IF
60
mA
PD
150
mW
1.41
mW/°C
OUTPUT DETECTOR
Collector–Emitter Voltage
Emitter–Base Voltage
Collector–Base Voltage
Collector Current — Continuous
Detector Power Dissipation @ TA = 25°C
with Negligible Power in Input LED
Derate above 25°C
VCEO
VEBO
VCBO
IC
PD
25
Volts
7
Volts
30
Volts
100
mA
150
mW
1.76
mW/°C
TOTAL DEVICE
Isolation Surge Voltage(1)
(Peak ac Voltage, 60 Hz, 1 sec Duration)
VISO
7500
Vac(pk)
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
PD
250
mW
2.94
mW/°C
Ambient Operating Temperature Range(2)
Storage Temperature Range(2)
TA
– 55 to +100
°C
Tstg – 55 to +150
°C
Soldering Temperature (10 sec, 1/16″ from case)
TL
260
°C
1. Isolation surge voltage is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
H11B1*
[CTR = 500% Min]
H11B3
[CTR = 100% Min]
*Motorola Preferred Device
STYLE 1 PLASTIC
61
STANDARD THRU HOLE
CASE 730A–04
SCHEMATIC
1
6
2
5
3
NC
4
PIN 1. LED ANODE
2. LED CATHODE
3. N.C.
4. EMITTER
5. COLLECTOR
6. BASE
REV 1
©^MM^oot^to^or^ro^ola^l,^aIn^Oc.^p1^t9^o9^e5^{lectronics Device Data}
1