CA2830C Datasheet, PDF (1/4 Pages) Motorola, Inc – 34.5 dB 5-200 MHz 800 mWATT WIDEBAND LINEAR AMPLIFIERS

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by CA2830C/D
The RF Line
Wideband Linear Amplifiers
. . . designed for amplifier applications in 50 to 100 ohm systems requiring wide
bandwidth, low noise and low distortion. This hybrid provides excellent gain
stability with temperature and linear amplification as a result of the push–pull
circuit design.
• Specified Characteristics at VCC = 24 V, TC = 25°C:
Frequency Range — 5 to 200 MHz
Output Power — 800 mW Typ @ 1 dB Compression, f = 200 MHz
Power Gain — 34.5 dB Typ @ f = 100 MHz
PEP — 800 mW Typ @ – 32 dB IMD
Noise Figure — 4.7 dB Typ @ f = 200 MHz
ITO — 46 dBm @ f = 200 MHz
• All Gold Metallization for Improved Reliability
• Unconditional Stability Under All Load Conditions
CA2830C
34.5 dB
5–200 MHz
800 mWATT
WIDEBAND
LINEAR AMPLIFIERS
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
DC Supply Voltage
VCC
28
Vdc
RF Power Input
Pin
+5
dBm
Operating Case Temperature Range
TC
– 20 to +100
°C
Storage Temperature Range
Tstg
– 40 to +100
°C
ELECTRICAL CHARACTERISTICS (TC = 25°C, VCC = 24 V, 50 Ω system unless otherwise noted)
Characteristic
Symbol
Min
Frequency Range
BW
5
Gain Flatness (f = 5 – 200 MHz)
—
—
Power Gain (f = 100 MHz)
Noise Figure, Broadband (f = 200 MHz)
PG
33.5
NF
—
Power Output — 1 dB Compression
(f = 5 – 200 MHz)
Po _1dB
630
Power Output — 1 dB Compression
(f = 5 – 200 MHz, VCC = 28 V)
Third Order Intercept (See Figure 10, f1 = 200 MHz)
Input/Output VSWR (f = 5 – 200 MHz)
Po _1dB
ITO
VSWR
1000
44
—
Second Harmonic Distortion
(Tone at 100 mW, f2H = 150 MHz)
Peak Envelope Power
(Two Tone Distortion Test — See Figure 10)
(f = 5 – 200 MHz @ – 32 dB IMD)
dso
—
PEP
600
Supply Current
ICC
270
CASE 714F–03, STYLE 1
(CA)
Typ
Max
—
200
± 0.5
±1
34.5
35.5
4.7
5.5
800
—
1260
—
46
—
1.5:1
2:1
– 60
– 50
800
—
Unit
MHz
dB
dB
dB
mW
mW
dBm
—
dB
mW
300
330
mA
REV 1
©MMOotoTrOolaR, OIncL.A19R97F DEVICE DATA
CA2830C
1