CA2818C Datasheet, PDF (1/4 Pages) Motorola, Inc – 18.5 dB 0.35-400 MHz 1000 mWATT WIDEBAND LINEAR AMPLIFIER

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
The RF Line
Wideband Linear Amplifier
Designed for amplifier applications in 50 to 100 ohm systems requiring wide
bandwidth, low noise and low distortion. This hybrid provides excellent gain
stability with temperature and linear amplification as a result of the push–pull
circuit design.
• Specified Characteristics at VCC = 24 V, TC = 25°C:
Frequency Range — 0.35 to 400 MHz
Output Power — 1000 mW Typ @ 1 dB Compression, f = 200 MHz
Power Gain — 18.5 dB Typ @ f = 50 MHz
PEP — 1000 mW Typ @ – 32 dB IMD, f = 200 MHz
Noise Figure — 5 dB Typ @ f = 200 MHz
ITO — 47 dBm Typ @ f = 150 MHz
• All Gold Metallization for Improved Reliability
• Unconditional Stability Under All Load Conditions
Order this document
by CA2818C/D
CA2818C
18.5 dB
0.35 – 400 MHz
1000 mWATT
WIDEBAND
LINEAR AMPLIFIER
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Supply Voltage
VCC
28
Vdc
RF Power Input
Pin
+14
dBm
Operating Case Temperature Range
TC
– 20 to +100
°C
Storage Temperature Range
Tstg
– 40 to +100
°C
ELECTRICAL CHARACTERISTICS (TC = 25°C, VCC = 24 V, 50 Ω system unless otherwise noted)
Characteristic
Symbol
Min
Frequency Range
BW
0.35
Gain Flatness (f = 0.35– 400 MHz)
Power Gain (f = 50 MHz)
Noise Figure, Broadband (f = 200 MHz)
FL
—
PG
17.75
NF
—
Power Output — 1 dB Compression (f = 200 MHz)
Third Order Intercept (See Figure 10, f1 = 200 MHz)
Input/Output VSWR (f = 0.35– 400 MHz)
Po _1dB
800
ITO
43
VSWR
—
Second Harmonic Distortion (Po = 100 mW) f2H = 0.35 – 200 MHz
dso
—
f2H = 200 – 400 MHz
—
Peak Envelope Power (Two Tone Distortion Test — See Figure 10)
PEP
600
f = 0.35 – 200 MHz @ – 32 dB IMD
f = 200 – 400 MHz @ – 32 dB IMD
Supply Current
ICC
190
CASE 714F–03, STYLE 1
[CA (POS. SUPPLY)]
Typ
—
± 0.5
18.5
5
1000
45
1.7:1
– 65
—
800
Max
400
±1
19.25
6
—
—
2:1
– 60
– 50
—
Unit
MHz
dB
dB
dB
mW
dBm
—
dB
mW
205
220
mA
REV 1
©MMOotoTrOolaR, OIncL.A19R95F DEVICE DATA
CA2818C
1